My Projects

[biggsgolf]

Youtube video of mechanics:

https://youtu.be/u-iuPsuF_0c

[He Who Shall Not Be Named]

Youtube video of mechanics:

https://youtu.be/u-iuPsuF_0c

Good, solid work there, but a bit too Rube Goldbergish for my taste; a simple two-yoke arrangement would have kept that linkage simple. Even in a tight pool, that SKIPJACK will turn just fine with the scale rudders.

[biggsgolf]

Good, solid work there, but a bit too Rube Goldbergish for my taste; a simple two-yoke arrangement would have kept that linkage simple. Even in a tight pool, that SKIPJACK will turn just fine with the scale rudders.

Thanks David!

[biggsgolf]

Video of Sub

https://youtu.be/uUmWLRlzgoM?si=5EPWdHcx_08LaN4X

[biggsgolf]

Any thoughts on how much original trimming ballast I should start with?

[He Who Shall Not Be Named]

Any thoughts on how much original trimming ballast I should start with?

1.5 - 2 lbs.

[biggsgolf]

1.5 - 2 lbs.

Thank you Sir!

[biggsgolf]

How does one sleeve a 3/16" bore prop for a 3MM driveshaft?

[He Who Shall Not Be Named]

How does one sleeve a 3/16" bore prop for a 3MM driveshaft?

By abandoning the evil, European Standards inflicted on this country by henchmen of the Dark Forces. Embrace Her Majesties Imperial standards of measurements, and always work in the Light.

Metric sucks!

David
The Horrible

[biggsgolf]

David, totally agree, Bob has a suitable Skipjack prop with 3/16" bore, I need 3MM bore

[JHapprich]

I join the dark side