The Akula comes in two flavors:
Progress on Ed's Type VII. The cylinder is 90% complete and the hull and linkages have been modified to accept it. I re-used Mike's slick hold-down system for the cylinder. I installed new guide bushings for the drive shafts as the old ones were running loose in the hull with a bit of slop (not a real issue, but it was bugging me!).
Delphin prototype is coming along slowly as we get time. Getting those big contra rotating motors in the back is a challenge, but we'll do it!
- Untouched 1/96 Akula, includes all the fittings and detail parts, photo etch, but no dry transfers or plan set .
- Brass propeller and periscopes
- 3.5 WTC older, but clean, lightly used if at all, 3 servos installed, and ballast servo.
- VEX 6 channel TX Brand new (no box)
- 6 channel RX brand new
- AD2 brand new
- Viper ESC brand new
- Missing pulse detector
- Asking $899
Progress on Ed's Type VII. The cylinder is 90% complete and the hull and linkages have been modified to accept it. I re-used Mike's slick hold-down system for the cylinder. I installed new guide bushings for the drive shafts as the old ones were running loose in the hull with a bit of slop (not a real issue, but it was bugging me!).
Delphin prototype is coming along slowly as we get time. Getting those big contra rotating motors in the back is a challenge, but we'll do it!
Comment