. Bill Bibeault Bronco Type XXIII Build
Collapse
X
-
-
Bit small. But I think this one will just about go- https://www.banggood.com/Mini-Smalle...r_warehouse=CNComment
-
Before I screw the frames up big time, and there is no information in the RTFI does this look right, if so great, Tom drill a 1/8 in hole for the alignment screw,
I did not have too it fell into the 1 inch hole exhaust hole
again is this right?
Thanks
BillComment
-
-
Comment
-
Yes David your right just like life, I broke one tab taking it off so I put that task aside for now, working on Conning Tower to I figure out how to fix my tap problem,
I may need to cut them all off and do something different Wine time HaHaComment
-
David
I just put the two hulls together a couple of times in fact and they go together great , have some more sanding and final touches to do, but works ok
So I am going to leave it for now, the taps being backwards that is and move on
I tried to get into your web site but does not load up, is it still active? Got the address from one of the post.
BillComment
-
David
I just put the two hulls together a couple of times in fact and they go together great , have some more sanding and final touches to do, but works ok
So I am going to leave it for now, the taps being backwards that is and move on
I tried to get into your web site but does not load up, is it still active? Got the address from one of the post.
Bill
DavidWho is John Galt?Comment
-
I check out the board, but don't participate. We had a falling out with the leadership over there about a decade ago.
What was the last worthwhile WIP thread you saw over there? Entropy has caught up with that bunch.
I build. They talk. I teach. Most of them have not advanced past the techniques and gear I developed and applied to this hobby in the 90's.
You may have gathered by now, Bill -- I don't play well with the other children.
DavidWho is John Galt?Comment
Comment