My experience is that it is a lottery Andy...you have to be very lucky to get a good one, else it’s a nightmare.......resin is expensive as you mentioned, and toxic as hell......all other consumables are expensive too and or have a very short lifetime..... the dimensional accuracy is non-existing......the cleaning process is very messy and afterwards your left with an amount of toxic wash residues.......and then you need a UV curing device. While printing you need to have a good ventilation/extraction.
When I work with it I wear so much PPE that you will think that I work at a toxic waste dump or something.
Bud .....when everting lines up and works out….those things give you amazing details.
It's all about what you get for the money you spent, don't expect dimensional accuracy and long lifetime with these low budget printers. If you want all that you have to spent 4k.
I didn’t so I’m not complaining, I knew what I was getting into, just want to share my experience regarding what you will get for your money and what to look out for.
Grtz,
Bart
When I work with it I wear so much PPE that you will think that I work at a toxic waste dump or something.
Bud .....when everting lines up and works out….those things give you amazing details.
It's all about what you get for the money you spent, don't expect dimensional accuracy and long lifetime with these low budget printers. If you want all that you have to spent 4k.
I didn’t so I’m not complaining, I knew what I was getting into, just want to share my experience regarding what you will get for your money and what to look out for.
Grtz,
Bart
Comment