unable to see any pictures in post 9 BUT the youtube link works and I am signed in ????????
Launch mechanisms?
Collapse
X
-
Comment
-
Redboat219,
Yup, you found them. How awesome are those mechanisms!!! Super clean craftsmanship!
George,
I noticed that something went wrong with the attached photos too. I usually post from my phone but for some reason that day the forum software was hell bent on making it difficult. I gave up and finished the post on the computer which finally let me attach the photos. The next day they were no longer showing up.
I’ll try to post them again here.
Last edited by Monahan Steam Models; 10-12-2020, 08:50 AM.Comment
-
Now that each part of the assembly has been tested, I can move on to building what I had designed for the starboard side launch tubes. The port side is the mirror opposite of this. I have most of the parts already completed just need to make a couple more small bits. Maybe later this week depending on how busy things are at work this week.
Comment
-
As far as I am aware of this launcher design is a bit different than the launchers David has built but I haven’t been around enough to know each and every design that he has crafted. He has built many. David would have the best eye for pointing that out if it shared any similarities. The parts that I know of that it will be using later which are the same as David’s are the miniature gas solenoid valves and the TCP unit to control them.
NickComment
-
-
Scott,
Thank you. The pneumatic cylinders I’m using for the door actuators are made by Clippard. The part number is sm-6. If I recall it has a .250” bore and a .375” stroke. Through Physical testing in hand, the stroke actually works out to .356”. The poppet valves I’m using are also made by Clippard. Part number mav-2c. Hope that helps
NickComment
-
So the lower door requires just a bit more travel from the pneumatic piston to fully open before the launch occurs. What I like about this design is that increased travel is easily programmed in to the profile of the launch ram that actuates the door. The travel of the ram is the same as the upper door for the most part but the effect it has on the door travel can be adjusted by the height of the lift designed into the ram. This is all well before the launch poppet valve is triggeredComment
-
Thanks for the explanation of the operation. I mentioned using water to expel the torpedo.
I was thinking of using a revolving valve to port water behind the fish from a water pump.
I will try and CAD it up and see what you think. Your door actuator is helping me understand
a way to open the doors.
Comment
-
In terms of modern diesel-electric submarines, it’s hard to beat Sweden. In 2005, one of them — the 200-foot-long HMS Gotland — sneaked up and virtually destroyed the American Nimitz-class carrier USS Ronald Reagan in a simulated war game. That was due in part to the ultra-quiet Stirling engines that...Who is John Galt?Comment
Comment