So I still have a leak thru my bow endcap where water is getting past the O Ring. I sent it to Bob and he replaced the O Ring and added 3 wraps of teflon under it. I am not happy as it is again leaking. Maybe I need a thicker O Ring? The teflon tape is a pain and it just seems like there should be a more suitable fix. I have gone to sealing the endcap with Gasket Maker which works. If I need to access the electronics I can carefully use a hobby knife to cut the sealant at the cylinder union with the cap. Any ideas?
Motor Bulkhead/Cylinder Union Leak
Collapse
X
-
So I still have a leak thru my bow endcap where water is getting past the O Ring. I sent it to Bob and he replaced the O Ring and added 3 wraps of teflon under it. I am not happy as it is again leaking. Maybe I need a thicker O Ring? The teflon tape is a pain and it just seems like there should be a more suitable fix. I have gone to sealing the endcap with Gasket Maker which works. If I need to access the electronics I can carefully use a hobby knife to cut the sealant at the cylinder union with the cap. Any ideas?
DavidWho is John Galt?Comment
-
-
David, can you provide me your address? My email is biggsgolf@mac.com
835 Holly Hedge Ave.
Virginia Beach, VA 23452Who is John Galt?Comment
-
Comment
-
OK, Your SD, the one you sent me for repair is a screaming pile of ****! There are many fatigue cracks in the cylinder, some bridge the internal bulkhead seals, causing leaking; that motor-bulkhead has been glued, screwed, and just plain abused to the point of uselessness. Why the **** would you glue the pushrod(s) to their respective seal bodies???!@!!!!!
Since what you sent me is so ****ed up, I made you a new one. Going out today. Live long and prosper, and all that happy horse-****.
In the future, you -- and those reading this ass-kicking -- If you have a problem with the new unit, something I produced and sold in working order, post your problem(s) here first so I can guide you so you don't screw things up.
DavidWho is John Galt?Comment
-
Bruce:
I have your box ready to go, but the only address on the box you sent me was a UPS store. E-mail me your address as soon as you can so I can get this off to you today. dmeriman@aol.com
DavidWho is John Galt?Comment
-
Bruce:
I have your box ready to go, but the only address on the box you sent me was a UPS store. E-mail me your address as soon as you can so I can get this off to you today. dmeriman@aol.com
David
DavidWho is John Galt?Comment
Comment