Welcome to our forums. For the best in R/C submarine kits, components and accessories, be sure to visit the Nautilus Drydocks
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
There is another trick to restore weld lines that might be even easier. You place masking tape left and right from the position you want to restore the weld, laving only a tine gap with the width of the weld line. Then you apply the putty, scrape it flat removing the excess putty and then peel off the tape. Easy....
Leave a comment: