Victor III
Collapse
X
-
Originally posted by rwtdiver
Bart! Just make sure you are having fun and making memorable times for yourself! Oh! Watch the fingers!!
Rob
"Firemen can stand the heat"
Great full that I could triggered some memories Rob and thanks for the compliments.
No need to apologies sir, just jump in whenever you want.
Grtz,
Bart
Leave a comment:
-
Corona lockdown is over and materials are "sometimes" available. Ordered a bunch of film coated plywood sheets (don't know the exact English name for it) and some 2x2 and 2x4.
Finaly making progress again.
The mobile workbench is finished as is the silencer for the dust extraction with the DIY cyclone filter.
yes I know I make things rather sturdy, I have sailed what did you expect.
Workbench
Dust extraction
Grtz,
Bart
Leave a comment:
-
I try to cut it in half longitudinal, used a 40 grid flap disk, took some decent amount of material off during the process. They only applied one stitch to keep everything in place, it was impossible to close it up. Pushrods were ok by some miracle, so I’m a lucky sob. It's just a scratch.
Grtz,
Bart
Leave a comment:
-
I'm surprised no one said glue the finger back in place and hit it with some primer. Sorry for your injury.Leave a comment:
-
DavidLeave a comment:
-
Oh no she is not hiding, she refuses to come out of the basement before the garage is dust free, painted and at her desired temperature.
I need to get the freezer out of the garage into the basement first to make room. Can’t do it on the moment because I tried to make an additional index finger with an angle grinder, although I failed the emergency staff agreed it was a good attempt.
I still need to make cabinets for the CNC, 3D resin printer and silent dust extraction.
Grtz,
BartLeave a comment:
-
some of the Supporting structure for the cabinets underneath the machines, they all will be mobile so I can place them were I want, small shop requires some out of the box ideas.
Grtz,
bart
Leave a comment:
-
Great work Mate. Can't wait to see you get back into the Victor. Onward!Leave a comment:
-
Making progress on the shop. Changing the workshop from the basement to the garage is a logistic challenge. The shed serves like an intermediate warehouse. The basement is rearranged as a laundry now. Made a decent railing on the stairs for now so nobody will take the fast way down, I will make a new stair after everything is moved out. My machinery is still there although dismantled.
Works done on the garage and why are some things done as they are:- Existing cabinets were removed and disposed off.
- Existing tiling removed and disposed off, Toughed-up plastering .
- Southerly brick wall, water barrier installed, applied new plaster.
- New shelving installed, wanted to keep max floor spacing, designed shelf so I can walk underneath (just).
- Made “wood board” shelf above the garage door, less high but much deeper to store spare boards and large cutoffs.
- Installed french cleats around the shop, I want a modular shop where I can move things around when necessary, everything you see hanging on the walls can be moved around.
- Rearranged lightening fixtures.
- Installed range hood for extraction of fumes, also the hood can slide from left to right.
Grtz,
Bart
Leave a comment:
-
Hi Guy's, I'm stil around. I'm busy for "who must me obeyed".
Kids outgrow the garden so we desided to turn it into our little paradise.
Landscaping the garden is almost finished, new shed, paving and flower boxed (don't know if this is a word).
As compensation we agreed that I can move my workshop from the basement to the garage were I have daylight, yes.
The content of garage (now acting as a laundry room) has to move to the basement, need to install an additional pump for the washing machine and replace the stairs, the one in now is to steep to be save (I was used to it but it will be to dangerous going up and down with the laundry).
So I'm busy on all front except on the sub, I haven't a workshop anymore, beginning of march is my goal to have it ready.
Grtz,
Bart
DavidLeave a comment:
-
Hi Guy's, I'm stil around. I'm busy for "who must me obeyed".
Kids outgrow the garden so we desided to turn it into our little paradise.
Landscaping the garden is almost finished, new shed, paving and flower boxed (don't know if this is a word).
As compensation we agreed that I can move my workshop from the basement to the garage were I have daylight, yes.
The content of garage (now acting as a laundry room) has to move to the basement, need to install an additional pump for the washing machine and replace the stairs, the one in now is to steep to be save (I was used to it but it will be to dangerous going up and down with the laundry).
So I'm busy on all front except on the sub, I haven't a workshop anymore, beginning of march is my goal to have it ready.
Grtz,
Bart
Leave a comment:
-
Me too, you Belgian muffin. Some of us have genuine excuses for not posting (and some others come from chocolate making countries)! Get with the program; I'm dying (literaly) to see this thing finished.Leave a comment:
Leave a comment: