AD2

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • biggsgolf
    Captain
    • Jan 2020
    • 720

    AD2

    Can anyone provide instructions on how to reset an AD2? I thought I would merely need to put in setup mode and redoe the settings but I cannot get it to go into setup mode. As it is, it is working but I need to adjust the servo throw endpoints it records.
  • Ken_NJ
    Captain
    • Sep 2014
    • 744

    #2
    Try contacting Kevin at kevinmc.electronics@gmail.com

    Comment

    • RCSubGuy
      Welcome to my underwater realm!
      • Aug 2009
      • 1768

      #3
      You're going about entering setup mode correctly? Power off cylinder, press setup button on AD2, power on RX, wait for the single, then double green lights and you're in the correct mode...

      Bob

      Comment

      • biggsgolf
        Captain
        • Jan 2020
        • 720

        #4
        hi Bob, yes, but green light does not stay lit

        Comment

        • RCSubGuy
          Welcome to my underwater realm!
          • Aug 2009
          • 1768

          #5
          Well, I'm stumped then. Give Kevin a shout. He'll get back to you almost immediately if past stays true.

          Bob

          Comment

          • biggsgolf
            Captain
            • Jan 2020
            • 720

            #6
            will reach out to him, thanks

            Comment

            • biggsgolf
              Captain
              • Jan 2020
              • 720

              #7
              Update:
              AD2 was connected to RX with wrong polarity, still powered on and worked, but could not re program it. Now is corrected.

              Comment

              • RCSubGuy
                Welcome to my underwater realm!
                • Aug 2009
                • 1768

                #8
                Powered up with positive 5v and grounding through the signal wire!? Wow. I’d never have thought…

                Comment

                • biggsgolf
                  Captain
                  • Jan 2020
                  • 720

                  #9
                  Me neither!

                  Comment

                  Working...