Is there Anything that Epoxy Will Not stick to

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • george
    Captain
    • Dec 2010
    • 727

    Is there Anything that Epoxy Will Not stick to

    Hello
    I was wondering besides silicone molding, is there any material that can be used to create a form and then pour epoxy into or to it so that the material will hold the epoxy till it cures and then the material can be removed by hand without needed a power sander to remove the material from the epoxy?
    Thanks for your tips/help.
    George
  • redboat219
    Admiral
    • Dec 2008
    • 2735

    #2
    Learn everything about what Resin does not stick to ✔ Tips and Tricks for the best materials ✔ Make sure your Resin gets demolded ✔
    Make it simple, make strong, make it work!

    Comment

    • JHapprich
      Captain
      • Oct 2017
      • 714

      #3
      PP.

      Smooth pvc.

      Comment

      • Subculture
        Admiral
        • Feb 2009
        • 2119

        #4
        Just apply four or five coats of a good non silicone wax, buffing between coats, will afford a good release from pretty much any material. You do have to be thorough though.

        Comment

        • george
          Captain
          • Dec 2010
          • 727

          #5
          Wow Thank You ALL for your replies here and for the link above. I did not know there were so many things that epoxy did not stick to.
          Thanks again for the tips.

          Comment

          • DrSchmidt
            Captain
            • Apr 2014
            • 919

            #6
            Teflon.....epoxy will not stick to teflon

            Comment

            Working...