Nikko Seawolf - blast from the past
Collapse
X
-
I think what David meant by "not scale" is the Nikko submarine is NOT a scale representation of a real life boat. Look at all the model subs being built here, you got your Skipjack, Seawolf, Akula, Alfa, Uniform, Kilo, Sierra, Type VII, XXI,XXIII etc. With the exception of Capt. Nemo's Nautitlus and USOS Seaview, most are based from real life boats.
How about using a vertical thruster in the docking collar of a scale DSRV?Make it simple, make strong, make it work!👍 1Comment
-
I never produced a 'hobby grade' r/c submarine because I, me, personally, deep in my soul, am not at all interested in any r/c submarine that is not based on a 'real' prototype -- be it factual or fictional.
The Niko sub is a successful exercise in pragmatism. A toy for the masses. And it worked, and if cared for gave good service for years. Good enough for those who don't care for the history of underwater vehicles, their look and operation. It's a near perfect pool-toy.
However, Skip Asay came very close to producing attractive, scale r/c submarines for the beginners. Had his equatorially split, vacuformed, flimsy WTC not been such a failure as an air-tight containment he would have changed the face of the hobby with his vacuformed ALBACORE and MARLIN kits -- But, his effort was to be only a small influencer. Most of those sold were never successfully made operational. What would have drawn more people into the hobby was doomed from the start by poor design.
There have been successful 'cheap' well running beginner submarines offered by Ron Perrott and Norbert Bruggen, and others. You just have to look for them. Not to mention the many, many toy submarines one can get for under $50.00.
We're not hurting for toy submarines.
DavidWho is John Galt?Comment
-
I think what David meant by "not scale" is the Nikko submarine is NOT a scale representation of a real life boat. Look at all the model subs being built here, you got your Skipjack, Seawolf, Akula, Alfa, Uniform, Kilo, Sierra, Type VII, XXI,XXIII etc. With the exception of Capt. Nemo's Nautitlus and USOS Seaview, most are based from real life boats.
How about using a vertical thruster in the docking collar of a scale DSRV?
DavidWho is John Galt?Comment
-
The SEAVIEW and the Disney NAUTILUS are real-life effects miniatures representing submarines. They qualify as real-life prototypes in my book, and worthy of duplication in model form. If you want to dance on the head of the pin you can point out that none of the above effects miniatures were 'practical'. But that, to me anyway, is the challenge: to make an r/c version of such a vehicle practical. Not toy-like.
David
As for the Nikko, yes it is a brilliant exercise in pragmatism. And in my book it is a working RC sub. One that actually performs very nicely, so I wouldn't be so fast to diss it as a toy. And it is easy to prepare for launch and small enough to travel in a suitcase. Checks many boxes in my book. Drawback is that I didn't build it (which is why it performs so nicely....) so that aspect is lost. I don't see it as an either/or but rather as a worthy addition to my growing fleet of subs.Comment
-
The SEAVIEW and the Disney NAUTILUS are real-life effects miniatures representing submarines. They qualify as real-life prototypes in my book, and worthy of duplication in model form. If you want to dance on the head of the pin you can point out that none of the above effects miniatures were 'practical'. But that, to me anyway, is the challenge: to make an r/c version of such a vehicle practical. Not toy-like.
DavidMake it simple, make strong, make it work!Comment
-
Well, as I said, my ultimate dream is to build a working RC Skydiver. All I'm learning while building other boats will (hopefully) go towards that goal at some point. I have the Skydiver as a 3d model for a display but that's a far cry from having it for a printable and working sub. A very much long term project. Sadly I missed the kits when they were available like 10 years ago from the UK and then Australia. At least I got like the last kit of a SHADO Mobile, which I successfully converted into a running RC tank. So at some point the sub should join the tank in the hunt. Oh yes, I also have a model of a UFO from the series. :)Comment
-
Well, as I said, my ultimate dream is to build a working RC Skydiver. All I'm learning while building other boats will (hopefully) go towards that goal at some point. I have the Skydiver as a 3d model for a display but that's a far cry from having it for a printable and working sub. A very much long term project. Sadly I missed the kits when they were available like 10 years ago from the UK and then Australia. At least I got like the last kit of a SHADO Mobile, which I successfully converted into a running RC tank. So at some point the sub should join the tank in the hunt. Oh yes, I also have a model of a UFO from the series. :)Comment
-
Just received a second Niko Seawolf from Ebay. This one looks like it was never run, but just purchased in 2003 and then stored without ever having seen water. Mint condition and operating on a different frequency from my first Seawolf. So first thing will be to remove all the silly decals and give it a new paint job.Comment
-
Is there enough space the bow compartment to install a video recorder?Make it simple, make strong, make it work!Comment
-
That's precisely the reason I got a second Seawolf. Well, plus to have a backup of the first boat as this is truly a great performing RC sub for little money.
To answer your question (like an engineer): It depends. :)
It depends on what camcorder we are talking about. So a GoPro Hero would not fit, nor of course anything bigger. But: There are now "cube" camcorders small enough to install there. I got one of those that comes already made with its UW case and it records "forever" onto a TF card. Shoots in color with a 150 degree wide angle. So far I tested the cube by itself and it works great. Slightly positive buoyant, but not too bad. So I'll have to mod the front cabin to make room for it and adjust the overall balance, but so far it looks doable.
Comment
-
Make it simple, make strong, make it work!👍 1Comment
-
Interesting video attached. I came up with the idea on my own, but here somebody else had a similar one. Obviously they mounted the camera up on top, pretty much on the CG of the boat. Gives them a nice foreground. But I hate the sound. I will likely dubb my video with some music anyway. And as discussed I want to mount the camera into the forward "crew" compartment.Comment
Comment