Project 665 Whiskey long bin 1/50

[JHapprich]

Soldering directly on the model with a fine hot tip at 450 degr.C was much easier than expected.again, figuring out where those struts go was the bigger effort... the fore, much shorter ones will be dummys from abs rod,glued on the hull.

[JHapprich]

Replaced the 2mm diameter safety tracks on the bow with 1mm rods to a more realistic measure. Also made the ladder-like gangway on the sail some mm narrower and put it to the right, where it should be instad of along the centerline.

[JHapprich]

Aft deck safety tracks:

[JHapprich]

Making the bollards:

[JHapprich]

Next group of ports for the aft deck reling. New way to make them: