I am going about producing two of the Typhoon subs from Bob's store by two methods. One is using a Prusa 3d FDM printer in an enclosure using ASA and the other is doing it out of resin (SirayaTech) on a Photon Mono X. I will post updates and pictures here as I work through the process. So far I have completed printing one hull out of Resin and am halfway through printing the other hull out of ASA. The resin printer has really great details and is printing well. The only issue with the resin is alot of supports are needed to get it off the buildplate and it has some dimensional problems in several of the pieces. THe ASA is printing very well and I'm doing it in high quality in an enclosure. I has some of the same issue with dimensional changes but pretty much everything is on track. Here are some pictures of my setup and the prints
The ASA parts even show the small quad holes that are like pinholes.
The resin has bee sanded some that is why some of the white dust.
The ASA parts even show the small quad holes that are like pinholes.
The resin has bee sanded some that is why some of the white dust.
Comment