A Skipjack in Ireland

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • He Who Shall Not Be Named
    replied
    what have I done?.....

    Leave a comment:


  • The Boattrainman
    replied

    Hi Hardrock,

    I humbly beg to differ, I think you are confusing him with Archie Menendez, world Indoor Hang-Gliding Champion and inventor of the Rotary Toilet. He was from Australia all right, but was deported to the USA and died in penury in 1867.

    Next you'll be telling us that an Irishman J. P. Holland from Cork was the father of modern submarining, you'll never get me to swallow that one!

    Rob
    Last edited by The Boattrainman; 01-22-2017, 05:53 PM.

    Leave a comment:


  • HardRock
    replied
    Originally posted by The Boattrainman
    Incidentally, David happened to mention Archimedes in passing. A little known fact is that Archimedes was Irish.

    The name probably comes from Altán O'Meath (and mangled by the locals into Archimedes), there was a large number of Irish immigrants (especially from County Meath) in Syracuse from 200 - 300BC, probably fleeing from the (again little known) first Irish Famine of the same period. Apparently, his family arrived around around 290BC and he was born in 287BC.

    As he grew up, basically an outsider, the only avenue to make a living (as most trades were a closed shop at that time) was to participate in dangerous sports, and he took up Bath Diving for a time, in which athletes would risk their lives by jumping from a great height into shallow basins of water (he was an expert at the 10m event). Very popular at the time given the risk of injury and death, the sport eventually becomes the modern version we see today at the Olympics (the bath replaced by a pool).

    Anyway, it was in executing these various dives that he came up with his famous method for measuring the volume of odd shapes, and he was famous for giving a loud shreik followed by his Mother's name Aoife (Ahh--Aoife, pronounced Ahh---eefah), hence the legend that became 'Eureka'.

    This kicked off his mathematics career.

    He had a sad end, killed by the Romans when they sacked the city in 212BC during the Punic Wars, his famous last words (although we will never know for sure) were 'noli turbare circulos meos' which is usually mistranslated as 'leave my circles alone' when in fact it means 'leave my potatoes alone'........turbare (derived from tuber i.e, potatoe).

    Archimedes the Irishman, look it up, it's all true.

    The Boattrainman
    In fact he was an Australian. Archie Mendes - a builder from Melbourne who did his apprenticeship during the (little known) first Australian financial stimulus package of 293BC. When his father, Bob decided to return to his native Greece, the whole family of 16 brothers, sisters and of course, Mrs Mendes went along too.

    Arriving in Syracuse, Archie took up work as a builder and tinkered with mathematics in his spare time. Being an Australian, he was naturally averse to bathing and a virtual compendium of stories grew about Archie, his bath and the wild excuses that he made up to avoid getting into it. He was regularly followed around town by a small mob who would remind him of his resulting stench by shouting at him,”You reeka”! (Greek for “You stink”) And it was true; he did.

    He eventually met a Roman soldier who took exception to his slack personal grooming skills and killed him. Poor ******* never made it back to Australia.

    And if you believed the Boattrainman you probably believe this too!

    Leave a comment:


  • The Boattrainman
    replied

    The completed retaining collar with some 3mm X 1mm strips of styrene for strength, 3mm brass rods simulate the threaded rod (lost in the post!).

    Click image for larger version  Name:	IMG_0765 (800x600).jpg Views:	1 Size:	214.5 KB ID:	119098



    The Boattrainman
    Last edited by The Boattrainman; 01-22-2017, 03:14 PM.

    Leave a comment:


  • The Boattrainman
    replied
    A collar of 0.5mm styrene, 3cm wide to the outer diameter of the tube is made. The position of the outer compression rods are marked, the collar has to be so thin so it will go under the retaining rods.

    Click image for larger version  Name:	IMG_0758 (800x600).jpg Views:	1 Size:	282.8 KB ID:	119090Click image for larger version  Name:	IMG_0757 (800x600).jpg Views:	1 Size:	202.3 KB ID:	119089


    U-section strips are glued at the four points, the collar is then trial fitted to ensure all is in line.

    Click image for larger version  Name:	IMG_0759 (800x600).jpg Views:	1 Size:	229.9 KB ID:	119091Click image for larger version  Name:	IMG_0760 (800x600).jpg Views:	1 Size:	201.8 KB ID:	119092


    The collar will retain the rods in position when the forward end cap is removed for charging, the retaining pieces are drilled to stop air/water getting trapped and reinforced with quarter round rod strips.

    Click image for larger version  Name:	IMG_0761 (800x600).jpg Views:	1 Size:	203.9 KB ID:	119093Click image for larger version  Name:	IMG_0763 (800x600).jpg Views:	1 Size:	213.5 KB ID:	119095


    The collar free floats along the tube and can be positioned away from resting points and fixtures, it's tight enough not to move once the rods are inserted.

    Click image for larger version  Name:	IMG_0764 (800x600).jpg Views:	1 Size:	246.3 KB ID:	119096


    The Boattrainman
    Last edited by The Boattrainman; 01-22-2017, 01:24 PM.

    Leave a comment:


  • He Who Shall Not Be Named
    replied
    Originally posted by The Boattrainman
    Incidentally, David happened to mention Archimedes in passing. A little known fact is that Archimedes was Irish.

    The name probably comes from Altán O'Meath (and mangled by the locals into Archimedes), there was a large number of Irish immigrants (especially from County Meath) in Syracuse from 200 - 300BC, probably fleeing from the (again little known) first Irish Famine of the same period. Apparently, his family arrived around around 290BC and he was born in 287BC.

    As he grew up, basically an outsider, the only avenue to make a living (as most trades were a closed shop at that time) was to participate in dangerous sports, and he took up Bath Diving for a time, in which athletes would risk their lives by jumping from a great height into shallow basins of water (he was an expert at the 10m event). Very popular at the time given the risk of injury and death, the sport eventually becomes the modern version we see today at the Olympics (the bath replaced by a pool).

    Anyway, it was in executing these various dives that he came up with his famous method for measuring the volume of odd shapes, and he was famous for giving a load shreik followed by his Mother's name Aoife (Ahh--Aoife, pronounced Ahh---eefah), hence the legend that became 'Eureka'. This kicked off his mathematics career.

    He had a sad end, killed by the Romans when they sacked the city in 212BC during the Punic Wars, his famous last words (although we will never know for sure) were 'noli turbare circulos meos' which is usually mistranslated as 'leave my circles alone' when in fact it means 'leave my potatoes alone'........turbare (derived from tuber i.e, potatoe).

    Archimedes the Irishman, look it up, it's all true.

    The Boattrainman
    It's official: I have been 'schooled'! big-time.

    David

    Leave a comment:


  • The Boattrainman
    replied
    Incidentally, David happened to mention Archimedes in passing. A little known fact is that Archimedes was Irish.

    The name probably comes from Altán O'Meath (and mangled by the locals into Archimedes), there was a large number of Irish immigrants (especially from County Meath) in Syracuse from 200 - 300BC, probably fleeing from the (again little known) first Irish Famine of the same period. Apparently, his family arrived around around 290BC and he was born in 287BC.

    As he grew up, basically an outsider, the only avenue to make a living (as most trades were a closed shop at that time) was to participate in dangerous sports, and he took up Bath Diving for a time, in which athletes would risk their lives by jumping from a great height into shallow basins of water (he was an expert at the 10m event). Very popular at the time given the risk of injury and death, the sport eventually becomes the modern version we see today at the Olympics (the bath replaced by a pool).

    Anyway, it was in executing these various dives that he came up with his famous method for measuring the volume of odd shapes, and he was famous for giving a loud shreik followed by his Mother's name Aoife (Ahh--Aoife, pronounced Ahh---eefah), hence the legend that became 'Eureka'.

    This kicked off his mathematics career.

    He had a sad end, killed by the Romans when they sacked the city in 212BC during the Punic Wars, his famous last words (although we will never know for sure) were 'noli turbare circulos meos' which is usually mistranslated as 'leave my circles alone' when in fact it means 'leave my potatoes alone'........turbare (derived from tuber i.e, potatoe).

    Archimedes the Irishman, look it up, it's all true.

    The Boattrainman
    Last edited by The Boattrainman; 01-22-2017, 11:37 AM.

    Leave a comment:


  • The Boattrainman
    replied
    The motor/gearbox is trial fitted, despite careful measurement it doesn't align with the shaft.

    Click image for larger version  Name:	IMG_0752 (800x600).jpg Views:	1 Size:	265.3 KB ID:	119074Click image for larger version  Name:	IMG_0753 (800x600).jpg Views:	1 Size:	244.9 KB ID:	119075


    A 2mm plate of styrene is just right to get it in line, I've made an alignment tool from short lengths of tube.

    Click image for larger version  Name:	IMG_0755 (800x600).jpg Views:	1 Size:	306.1 KB ID:	119077Click image for larger version  Name:	IMG_0754 (800x600).jpg Views:	1 Size:	228.8 KB ID:	119076


    The motor with universal coupler is now perfectly in line with the stuffing tube, and a dummy shaft is trial fitted.

    Click image for larger version  Name:	IMG_0756 (800x600).jpg Views:	1 Size:	264.9 KB ID:	119078



    The Boattrainman
    Last edited by The Boattrainman; 01-21-2017, 12:20 PM.

    Leave a comment:


  • The Boattrainman
    replied
    Hi Trout,

    It's a learning curve for me, I get your bevelled rim idea, the next stage will be testing the integrity of my inner and outer O rings when the revised diameter ones arrive.

    Rob


    Leave a comment:


  • trout
    replied
    Sounds like you have a plan already and have it worked out.
    Not to counter you, but you can get a very good compression of o-rings. They will need to have room width wise in a channel (for me, a flat bottom or square channel works easier) to spread when it it getting smooshed (not a real word). I see you are using a o-ring at the end and the tube is compressing that, correct? Then my next suggestion will not work, but you need a bevel on the inner edge of the tube to help the compression process.

    Leave a comment:


  • The Boattrainman
    replied
    Hi guys,

    Prob didn't explain that right, it's the O ring diameter that's now wrong, by dropping it down to 75mm cross section it will be a tight fit again. I over-estimated the amount you can compress an O ring, I though by leaving 1mm excess all round the join the inner face of the WTC would squeeze the O-ring flat, but not so.

    The compression rate of the O ring appears to be very small, hence the filing of the U channel to reduce the excess to around 0.2/0.3mm. As I said very tricky the only job I didn't enjoy on this build, as over-file the channel and the there would be a gap between the O ring and the inner wall of the WTC (then I would need the teflon tape) . I estimate the channel gives room of 2.7/2.8mm, so a 3mm thick O ring is still perfect, just a different diameter.

    Sounds more complex than it is!!!

    .
    Last edited by The Boattrainman; 01-21-2017, 09:47 AM.

    Leave a comment:


  • HardRock
    replied
    Trout, I get the impression that the Boattrainman might be a tad more anal than that. I suspect that if it isn't perfect, he'll start again and make it so.

    Leave a comment:


  • trout
    replied
    use teflon tape, wrap the channel 5 or 6 times (or as many times as needed). You could also take some marine epoxy and run it in the channel. Keep the endcap on a motor or drill (slow) until the epoxy firms up. That prevents sagging or thick areas. Either of these will take up that slop.

    Leave a comment:


  • The Boattrainman
    replied
    The caps are filed with a round file where the inner O Ring will sit, to create a U-shaped groove for the ring to sit in. This job was a pain in the butt, as just a few microns too heavy and the gap between the inner surface of the WTC and the O ring could be ruined. A job not possible when the cap parts are all separate as you can't file a U-shape on an edge.

    During this process I thought a compression rate for the 3mm O ring of 33% (i.e, 1mm for 3mm depth), it's more light 5-10%, hence a lot of filing of the inner space, took around 3 hours to carefully file the excess.


    Click image for larger version  Name:	IMG_0745 (800x600).jpg Views:	1 Size:	242.6 KB ID:	119046Click image for larger version  Name:	IMG_0747 (800x600).jpg Views:	1 Size:	234.6 KB ID:	119047


    The inner and outer O Rings on the forward cap, there is a compression gap at this end between the end cap and the tech rack, to give room for the outer rings to be squeezed tight.

    Click image for larger version  Name:	IMG_0748 (800x600).jpg Views:	1 Size:	221.0 KB ID:	119048Click image for larger version  Name:	IMG_0749 (800x600).jpg Views:	1 Size:	226.7 KB ID:	119049


    The forward cap gets a fitting to hold it to the correct axis as per the bow cap (threaded rods at 12, 3, 6 and 9 o'clock), lining up with the horizontal of the tech rack. It just a scrap piece of 3.2mm styrene but with all rounded ends so the fitting slips easily into place on the rack. It also holds the battery holding flap down.

    Click image for larger version  Name:	IMG_0750 (800x600).jpg Views:	1 Size:	207.9 KB ID:	119050Click image for larger version  Name:	IMG_0751 (800x600).jpg Views:	1 Size:	202.8 KB ID:	119051



    So confession time, I made a stupid mistake with the size of the inner O ring. As sized to fit on the 80mm inner disc, at 80mm cross section it is perfect, but when you sand the inner disc as above it reduces in diameter and the 80mm O ring is now a sloppy fit and too big.

    Lesson, when ordering O rings, buy them 2/3mm under sized in inner diameter to be a tight fit and allow for a bit of fettling.


    The Boattrainman
    Last edited by The Boattrainman; 01-20-2017, 03:55 PM.

    Leave a comment:


  • The Boattrainman
    replied
    A main power switch with extension arm (1.5mm brass rod) is made from an old model railway switch and Plasticard mount, a 12V mini LED will act as Power On indicator. I always have an indicator beside the main switch as this is helpful to know the electrics are 'live' when working on them, especially as the model won't be fused, I don't think fuses and subs are a good mix.

    I'm hoping this will fit at the top rear of the tech rack.


    Click image for larger version  Name:	IMG_0741 (800x600).jpg Views:	1 Size:	257.9 KB ID:	118984Click image for larger version  Name:	IMG_0743 (800x600).jpg Views:	1 Size:	253.1 KB ID:	118985Click image for larger version  Name:	IMG_0744 (800x600).jpg Views:	1 Size:	231.9 KB ID:	118986




    The Boattrainman

    Leave a comment:

Working...