Thanks for responding.
I'll look at the whole photo upload problem over the weekend if I get a chance, agree a picture is far better than a load of text.
I re-sized them down to fit, but sure it's not my forte!
The Boattrainman
A Skipjack in Ireland
Collapse
X
-
You can put screens over the holes, but I would not recommend it. There are a couple of reasons that I can come up with. You are restricting water getting into the hull, meaning it will slow down dive times. The second reason was brought up by you, the larger subs used them to stop debris. So will your scale ones do too, but there are more particulates in a pond that you may find them getting clogged faster. Then cleaning them will be the other fun issue.I'm going with some grating on the openings.
Why bother, I doubt if this is a scale mesh for this vessel (given it was supplied for 1/35 scale model!). I think the larger holes don't look right just blank, I think there would be some sort of debris restriction to prevent crap getting access, plus my local boating water is less than clean, so I'm hoping they will perform the same job for me. I have 1/72 mesh, it's too fine to let water in and out.
Anyways, open a Photobucket account and put your photos there, at least we will be able to see them.
A couple of thoughts as to why photos may not be posting. I know that if I am typing and constructing my thoughts, it can take awhile, the server will flush those pictures out. Other things that come to mind are size too big? is it a jpeg format?
I really hope we figure it out. I want to see what you are doing. I am sure a visual learner.
Leave a comment:
-
I'm going with some grating on the openings.
For the round holes, I had some mesh grating in the spares box, so along with some 10mm strips of 1.5mm Plasticard, I've made a small square into which a piece of grating is pushed (a tight fit) with plenty of CA glue.
Why bother, I doubt if this is a scale mesh for this vessel (given it was supplied for 1/35 scale model!). I think the larger holes don't look right just blank, I think there would be some sort of debris restriction to prevent crap getting access, plus my local boating water is less than clean, so I'm hoping they will perform the same job for me. I have 1/72 mesh, it's too fine to let water in and out.
I've ordered a PE sheet of square grating for the square holes, will be doing those also.
There is a guy in the UK (see link below), but he only sells the gratings as part of his complete upgrade kit which I'm not using. So scratch building it is!
TheBoattrainman
Last edited by The Boattrainman; 04-03-2016, 11:23 AM.Leave a comment:
-
I've reloaded all the photos, but I'm getting a 'you do not have permission to upload or remove photos' message.
Anyone got any idea why?
The Boattrainman
Leave a comment:
-
Strange this, when I log back in they are there, yet not when I view without log-in!
If no one has a remedy, I'll e-mail them to you.
The Boattrainman
Leave a comment:
-
Your photos are not showing up. I definitely want to see what you are doing!Leave a comment:
-
I'm going with working lights (I know they are only used on surface running) but I want 'em!!! I'll go with the sail lights and tail light using small 3mm LEDs with a resistor.
The sail lights appear to swivel out of small openings over the crew doors, so using 1mm Plasticard and a circle cutting tool, I made four quarter circle fittings that form the upper and lower part of the light fittings with a 0.5mm piece of Plasticard the size of the little openings as a backing.
The wires will be totally encased in epoxy on the inside once I've attached the wiring.
It was impossible to wire them from the bottom, as my photo show the real thing as a cylinder shape, I've filed LEDs before into such a shape, but they are so small this time and the light fitting tiny they had to go this way!
Last edited by The Boattrainman; 04-03-2016, 11:20 AM.Leave a comment:
-
A Skipjack in Ireland
This thread details the building of a 1/72 Revell 'Skipjack' with working lights and a homemade Water Tight Cylinder (WTC)
Greetings from Dublin in Ireland (that small island off the west of Europe beside the UK!!!)
Have started on a 1/72 Revell Skipjack, which will hopefully be USS Sculpin as I like the paint scheme, just got a work stand built and made the cuts as per the Cabal reports by Mr. Merriman.
As per the photos I've added slim fillets of 0.5mm Plasticard at each join seam of the Z cuts, plus I'm spending most time on the seams where the kit halves are joined.
I came across a really useful tool for the seams (in the USA on holidays last year as it happens) it's basically a 2 foot long metal straight edge that you stick some sandpaper on to (in this case 120 grit) with two-sided tape.
Anyway, will post progress as I go, won't be covering what's already done on other threads, but hopefully have a few ideas where it can be improved.
The BoattrainmanLast edited by The Boattrainman; 01-22-2017, 06:37 AM.Tags: None
Leave a comment: