Search Result
Collapse
500 results in 0.0449 seconds.
Keywords
Members
Tags
-
While awaiting the arrival of the O-rings, I assume the come by pigeony, I designed a gearbox for the pump. This design keeps everything compact, ensuring... -
Assembling the pump. Tolerances were still good after fully curing.
Lip seal and bushing were pressed in place using the drill press....Leave a comment:
-
the 310gr or 310ml is the minimum ballast tk volume required....Leave a comment:
-
I've been occupied with the design of the WTC.
To determine the minimum lifting capacity of the WTC, I measured the weight of the hull above...Leave a comment:
-
Fantastic that you provided the letters in way of the securing & lashing point hatches.
Grtz,
Bart...Last edited by He Who Shall Not Be Named; 04-21-2024, 04:44 AM.Leave a comment:
-
Bow and stern glued in place with CA. As I don't want to rely solely on the CA, I added a strip of fiberglass mat on the section seams and fixed it with...Leave a comment:
-
Made all the 4mm stainless steel (SS) indexing pins (tapered), reinforced the hull with frames that also serve as supports for the WTC. Very happy with...Leave a comment:
-
Thks Tom, It has been too long, feels good to work on somthing for myself.
Grtz,
bart...Leave a comment:
-
PETG, glued in with epoxy, 4mm holes were included in the print and afterwards reamed for a snug fit.
Grtz,
Bart...Leave a comment:
-
It's been a while due to various reasons and other scale projects.
All parts were printed with better supports this time.
My...👍 1Leave a comment:
-
Hi Will,
I took a look online and found something that might be useful. The person will be capable of scaling the props to your desired dimensions....Leave a comment:
-
Just sharing.....
Jig for holding the blades in place when soldering
...Leave a comment:
-
To set the depth seems not so simple as the signal from the transmitter varies and is not stable. For the moment, I have run into a personal limitations...Leave a comment:
-
I was talking to a friend and former colleague of mine, and we discussed the open-source aspect of my project. One of the points we raised was the variability...Leave a comment:
-
I did....this is the one I considered JSN SR04T
https://www.google.com/search?q=JSN+...05&oq=JSN+SR04...Leave a comment:
Leave a comment: