Victor III

[bwi 971]

Hi Gents, I'm back

Sorry for the AFK/MIA but I had to adress some personal issues

He Who Shall Not Be Named HardRock I have sent an e-mail.

Continued since last monday on the VCTOR III and started to work on scott's BELUGA.

Cut off the excess and sanded the parting lines on the hull halves, they match perfect good Job scott
Filling the pinholes with putty at the moment.....think I will finish it today.

Tomorrow I will post the progress on the VICTOR III

Grtz, Bart



Parting line.....easy life.....just sanded it down to the transition line gelcoat-cloth




Filling the pinholes....some done......others discovered and marked with pencil.
When sanding all the scribing Scott did pop out clearly, amazing how much detail there is.




Adressing the tail piece that came along.....well done.....will make life easy assembling this beauty.....darn I love this sub already.....this will be my daily driver for sure.

[SSBN659]

Been very interested in this build but haven’t seen anything for awhile so let’s have a progress report.

”Will” Rogers
SSBN659

[HardRock]

How long can it possibly take to renovate ONE bathroom?

[bwi 971]

ROFLMAO
Grtz,
Bart

[He Who Shall Not Be Named]

Nothing to fear, Bart. I've lost the will to live!

David
Buggy-Whip Maker

[bwi 971]

OK, Bart. Lets see the drilling jig you made to get those holes just right.

David

I did not use a jig David
I designed the bow piece with the torpedo tubes as a separate section. This way I had a stable & rigid platform with a very low profile.

My first thought was to fabricate some plugs that go into the tube holes, 0.5mm smaller in diameter, so I will obtain a scribing effect. But looking at them now I think they look awesome without. For the potential assembler is would be nice that he could chose, leave them open or put the plugs in.
However, the later will mean that I have to integrate them when I layup the bow with fiberglass, probably I can only pull that off is by using chopped glass fibre.

Grtz,
Bart

[bwi 971]

Looks 3D printed. Is it Bart?

No, altough I used some machines, it’s handcrafted Tom, I will explain why:

• First, I used a 3D printer, capable of printing Polyurethane foam up to 0.05 mm.
• Next step I use a CNC router to get lost of the printing lines
• To face off the pieces I used a CNC lathe
• The final operation was to sand the whole thing down with 1500 grid sanding paper.

And by using this last-mentioned technique, which I think is highly skilled, I can say honestly that it is a HANDCRAFTED piece of ART.

As you will understand I’m leaving this forum for what it is for the next couple of weeks ……please sent me a PM when the unleashed dragon is calmed down.

Grtz,
Bart

[HardRock]

Wash your mouth out with soap Tom. I never thought that I'd see you write such a thing!!!

[trout]

Looks 3D printed. Is it Bart?

[He Who Shall Not Be Named]

OK, Bart. Lets see the drilling jig you made to get those holes just right.

David

[HardRock]

Beautiful is not a good enough word! Yes, you did nail it.

[bwi 971]

The business end......I nailed the shape me think.










Comparison with my AKAULA master....that VICTOR is so much more organic in shape I just love it.



Grtz,
Bart

[HardRock]

Heheheheheheeeeeee..... its so nice to be soooooooo far away; so far away, so far awayeeeee.......

[He Who Shall Not Be Named]

It'll be 3d printing next thing. Dave will have an embolism!

Too late, Andy: I already spewed my venom on that subject at another forum. Needless to say, I became persona non grata over there in minutes.

David
The Horrible

[Subculture]

It'll be 3d printing next thing. Dave will have an embolism!