I figured out a way to make the Becker Rudder simply. I sit on sofa at end of day and think how to in my little head among you giants. Tom Anderson is printing the 1/48 hull as I write this. He is using his Bambu Lab A1 large printer. Tom will print two sets of 1/48 rudders. I will have the default Rudders and a second pair printed to rebuild withe Becker flap. It will be then easy to interchange and see the r turning performance firsthand. If I am wrong and my idea doesn't work, I still have the default backups. The upper and lower rudder are identical, just one inverted.


USS SARGO (SSN 583) STATIC MODEL 1/96 Scale
Collapse
X
-
-
Tom Anderson is cranking it out. He is using both machines (show off). Shows second set of rudders for my Becker rudder experiment.
Updated printing all done. sketching out the bow planes. I know I know that it is supoosed to be drawn on a coffee shop napkin, but didn't have any..lol
Last edited by Albacore 569; 11-15-2026, 09:02 PM.Comment
-
Re-Designed new Sargo (skate class bow planes. (More rectangular). completed. Randy Sanders redesigned for me after I asked. Thanks. Propellers from Keith Bender arriving in a few hours.
Last edited by Albacore 569; 11-18-2026, 01:59 PM.Comment
-
-
Thank you. I know, I left a little long till I make the retract system and test for fit first. Note how the tip shape from above is more a radius.
That's why I'll wait till it's that time. Easier to take off than to add on.
Isn't the mine cable guard interesting? Mechanically nice they would be available, but if mines got that close, aren't they in a heap of bull dust already? LOL. Of course, mines were different then too. Did the Skates do any special ops like Ivy Bells too?
Last edited by Albacore 569; 11-19-2026, 01:32 PM.Comment
-
I think that after a while, mine cables became one of those ideas that was just bad to start with! Waiting to do your fit-up later is not a bad idea! I don't know if the Skates got too involved in the special operations world, but I think I recall a story of one getting pummeled in the Sea of Oshkosh. Mighta been a different ship, though. I am getting older!Comment
-
... and a boat Diver's nightmare. Thank God my boats never bothered with them.I think that after a while, mine cables became one of those ideas that was just bad to start with! Waiting to do your fit-up later is not a bad idea! I don't know if the Skates got too involved in the special operations world, but I think I recall a story of one getting pummeled in the Sea of Oshkosh. Mighta been a different ship, though. I am getting older!Who is John Galt?Comment
-
I'm a big fan of mine cables, having heard a moored mine chain dragging down the side of our ship in Indian Country. I was on the OP you mentioned in '81 (earned every grey hair I had at the tender age of 24). The S-girls did some good recon Spec Ops but weren't configured for what we were doing. No such place as Oshkosh --unless you're into airplanes.I think that after a while, mine cables became one of those ideas that was just bad to start with! Waiting to do your fit-up later is not a bad idea! I don't know if the Skates got too involved in the special operations world, but I think I recall a story of one getting pummeled in the Sea of Oshkosh. Mighta been a different ship, though. I am getting older!Comment
-
Thanks, CC Clarke, a very sufficient enough answer for me. The S boats? Interesting slang term for the class. They were smaller than other SSNs, so it seemed logical. Smaller subs seem to b get such work. But the USS Jimmy Carter size seems to sink my submarine size theory. Just were to put everything inside, special electronics and space for a few 'spook' passengers, separating them with a special workspace separate from the crew glimpsing at them only in in e crew's mess. Must have been interesting.
I'm a big fan of mine cables, having heard a moored mine chain dragging down the side of our ship in Indian Country. I was on the OP you mentioned in '81 (earned every grey hair I had at the tender age of 24). The S-girls did some good recon Spec Ops but weren't configured for what we were doing. No such place as Oshkosh --unless you're into airplanes.
When the S boats were not carrying Navy meteorologists to the North pole or photographing polar bears, substituting meteorologist for spooks for a different trip, not North, but 'North by Northwest'. Glad the Skates somewhere someway have such a history operationally, if a very secret one of course.
I knew one spook, was a former medical ER doctor and also spoke fluent Chinese. who was sick and tired of pronouncing dead kids in ER's from multiple gunshot wounds. And as usual as you expect contrary to the stupid movies he never stood out, he blended into any crowd easily. I only knew of him because this dumb modeler was lucky enough to run RC subs with him together long ago. He's passed away now, & his name in memory only dies with me. As F Gump, would say, "that's all I want to talk about that."Last edited by Albacore 569; Today, 11:49 AM.Comment



Comment