...
Announcement
Collapse
No announcement yet.
Home
Collapse
-
If you suspect your print bed isn't level, start there first. No amount of platform additions or adhesives will compensate for an unlevel bed. There are...
Leave a comment:
-
Obviously you've mastered the resolution settings discussed in post 37. Do you have any other tips in Fusion 360 for new users to get the most out of...
Leave a comment:
-
Which is why thin coats are applied; the viscosity can be adjusted by tweaking the ratio of the two-part liquids to some extent. The DSRV for example,...Last edited by CC Clarke; 01-10-2021, 09:01 AM.
Leave a comment:
-
I spent about five minutes sanding micro-blobs off a couple of parts. The layer lines from my printer are barely visible for properly oriented parts,...
Last edited by CC Clarke; 01-09-2021, 09:37 AM.
Leave a comment:
-
Excellent. It took me awhile to find the proper resolution recipe when converting files back and forth from SolidWorks.
I once took down...
Leave a comment:
-
[QUOTE=tifosi12;n146464]
Gloves are more than adequate, and protective eyewear is recommended if you're spastic. It's a two-part epoxy and...
Leave a comment:
-
I've attached a couple of renders of the stock (as printed) DSRV - with a newer (textured) version I'm rebuilding that will have a 688 mothership base...
Last edited by CC Clarke; 01-07-2021, 10:10 PM.
- 1 like
Leave a comment:
-
For anyone following along that wants to learn about mesh / object resolution related to slicing and ultimately sweet-looking prints that require less...
Last edited by CC Clarke; 01-07-2021, 09:59 PM.
Leave a comment:
-
The slicer has no effect on the faceting - it only affects the layer properties when the printer extrudes the hot noodle of plastic.
The...Last edited by CC Clarke; 01-07-2021, 06:32 AM.
Leave a comment:
-
[QUOTE=RCJetDude;n146445]My first full on Fusion 360 project. Took me about 5 days and 2 versions but is now printing very nicely on my Ender 3 Pro using...
Last edited by CC Clarke; 01-06-2021, 09:38 PM.
Leave a comment:
-
Just to keep this so people who aren't printer-heavy can follow along better, you're discussing a resin printer, which is a lot different than an FDM...
Leave a comment:
-
This would be a tactical waste of space when stowed within a torpedo tube, (even as a multiple round) compared to a MK-48 (there's no replacement for...
Leave a comment:
-
This is a nice-looking build and a good example of using 3D printed parts.
As for submarine terminology, the "bollards" (land-locked...
Leave a comment:
-
3D Modeling is something I've had a little experience with both as a student and later, instructor, so I'll throw out a little of what I've learned along...
- 1 like
Leave a comment:
No activity results to display
Show More
Leave a comment: