Assembling the pump. Tolerances were still good after fully curing.
Lip seal and bushing were pressed in place using the drill press....
Search Result
Collapse
500 results in 0.1613 seconds.
Keywords
Members
Tags
-
the 310gr or 310ml is the minimum ballast tk volume required....Leave a comment:
-
I've been occupied with the design of the WTC.
To determine the minimum lifting capacity of the WTC, I measured the weight of the hull above...Leave a comment:
-
Fantastic that you provided the letters in way of the securing & lashing point hatches.
Grtz,
Bart...Last edited by He Who Shall Not Be Named; 04-21-2024, 04:44 AM.Leave a comment:
-
Bow and stern glued in place with CA. As I don't want to rely solely on the CA, I added a strip of fiberglass mat on the section seams and fixed it with...Leave a comment:
-
Made all the 4mm stainless steel (SS) indexing pins (tapered), reinforced the hull with frames that also serve as supports for the WTC. Very happy with...Leave a comment:
-
Thks Tom, It has been too long, feels good to work on somthing for myself.
Grtz,
bart...Leave a comment:
-
PETG, glued in with epoxy, 4mm holes were included in the print and afterwards reamed for a snug fit.
Grtz,
Bart...Leave a comment:
-
It's been a while due to various reasons and other scale projects.
All parts were printed with better supports this time.
My...👍 1Leave a comment:
-
Hi Will,
I took a look online and found something that might be useful. The person will be capable of scaling the props to your desired dimensions....Leave a comment:
-
Just sharing.....
Jig for holding the blades in place when soldering
...Leave a comment:
-
To set the depth seems not so simple as the signal from the transmitter varies and is not stable. For the moment, I have run into a personal limitations...Leave a comment:
-
I was talking to a friend and former colleague of mine, and we discussed the open-source aspect of my project. One of the points we raised was the variability...Leave a comment:
-
I did....this is the one I considered JSN SR04T
https://www.google.com/search?q=JSN+...05&oq=JSN+SR04...Leave a comment:
-
The progress today, the PID in place and it controls the servo as the depth changes; the tube in the glass.
Requested depth was manualy set in the...Last edited by bwi 971; 10-24-2023, 04:02 PM.Leave a comment:
Leave a comment: