Chinese Sub Build

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Das Boot
    Rear Admiral

    • Dec 2019
    • 1488
    #1

    Chinese Sub Build

    Don’t expect too much at one time. This is my first one. Trumpeter included what looks like missile tubes in the bottom hull. I don’t know what they’re for, but I’m gonna have to cut them out for the WTC. Also there’s a lot of flash to cut away on the hull halves. Click image for larger version Name: IMG_7796.jpg Views: 193 Size: 50.7 KB ID: 184713
    Of the approximately 40,000 men who served on U-boats in WWII, it is estimated that around 28,000 to 30,000 lost their lives.
    Tags: None
    • He Who Shall Not Be Named
      Moderator

      • Aug 2008
      • 13404
      #2
      These shots should give you some pointers, Casey:




















































































      Who is John Galt?
        👍 2

        Comment

        • redboat219
          Admiral

          • Dec 2008
          • 3381
          #3
          Recommended motor size?
          Make it simple, make strong, make it work!

            Comment

            • He Who Shall Not Be Named
              Moderator

              • Aug 2008
              • 13404
              #4
              Originally posted by redboat219
              Recommended motor size?
              Anything that will fit the cylinder... I don't obsese over motor type, code, voltage, or family history. If it works, fine, if not, I cram a replacement in and see how that works.

              Click image for larger version Name: DSCF2043.jpg Views: 67 Size: 41.9 KB ID: 184925
              Click image for larger version Name: DSCF2046.jpg Views: 71 Size: 46.6 KB ID: 184926
              Click image for larger version Name: DSCN0015.jpg Views: 54 Size: 50.4 KB ID: 184927
              Click image for larger version Name: DSCF2023.jpg Views: 54 Size: 94.0 KB ID: 184928
              Who is John Galt?

                Comment

                • redboat219
                  Admiral

                  • Dec 2008
                  • 3381
                  #5
                  So no to prop diameter = motor can size.
                  Make it simple, make strong, make it work!

                    Comment

                    • He Who Shall Not Be Named
                      Moderator

                      • Aug 2008
                      • 13404
                      #6
                      Originally posted by redboat219
                      So no to prop diameter = motor can size.
                      Sure... why not?
                      Who is John Galt?

                        Comment

                        Previous template Next
                        Working...