Sm uc 5 u-boat

[rwtdiver]

Rob
What Radio did you use on the UC-5?
Bill

Bill,

I used an old 4 channel 2.4 transmitter and receiver for my build. I built and designed the UC-5 as a surface runner only. I started out in my WTC compartment design to use the VEX radio system. I then decided to go with a brushless motor with a bi-direction ESC! If you go back through my build blog you with see the methods that I decided to go with.

Rob
"Firemen can stand the heat."

[cgbillb]

Thank you
Yes I have copied all your photos and in the am will copy all your text.
Bill

[David1234]

Hello Rob, Your information is very usefull , how did the testing go ???hope your ok as this log stopped a year ago.

I was wondering do you give access to your stl files for the wtc.

Thanks Dave

[rwtdiver]

The first photo is the finished SM UC-5 U-boat with the surface runner sub driver cylinder. The last photo shows my latest Star Wars K2SODroid holding the SM UC-5 submarine. along of course my newest addition K2D2. Both new Droid additions are standing with my InMoov Robot which was built about two years ago.



The SM UC-5 performed great in my pool as a surface runner. If my eyesight holds out I am going to fabricate a new cylinder and add a ballast system .I will also try doing some scale paint work with weathering...

Rob
Firemen can stand the heat."

[He Who Shall Not Be Named]

The first photo is the finished SM UC-5 U-boat with the surface runner sub driver cylinder. The last photo shows my latest Star Wars K2SODroid holding the SM UC-5 submarine. along of course my newest addition K2D2. Both new Droid additions are standing with my InMoov Robot which was built about two years ago.



The SM UC-5 performed great in my pool as a surface runner. If my eyesight holds out I am going to fabricate a new cylinder and add a ballast system .I will also try doing some scale paint work with weathering...

Rob
Firemen can stand the heat."

Weathering, Rob????

Welcome to the Dark Side.

Sith David