Toy conversion to 1/230 ALFA

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JHapprich
    Rear Admiral

    • Oct 2017
    • 1118

    #16
    Yes, you are absolutely right, however i have decided to make it that way, as i will have very very very little freeboard. Afterall, it is not scale, more a toy. I did not add more details to the sail too. No waterline, no draftsmarks.

    Actually there should be grey till the centerline, antifoul red all lower half, waterline on the level of the upper rudder/hull transition and four draftmark columns on each side. I orientated my scheme on that drydock picture of the scrapyard. That one must have been sitting too low in the water for some time.

    Click image for larger version  Name:	f368d3419a8b789a4e440424e7376a06.jpg Views:	0 Size:	53.7 KB ID:	198658

    But i can tell you, it was a hard decision to do things wrong on intent;-)


    Some more gems:

    Click image for larger version

Name:	09-10278497-705-differ-1.jpg
Views:	26
Size:	53.8 KB
ID:	198663 Click image for larger version

Name:	08-3060521-001-1.jpg
Views:	25
Size:	68.1 KB
ID:	198664



    Click image for larger version  Name:	nhnjjnm.jpg Views:	0 Size:	47.7 KB ID:	198662 Click image for larger version  Name:	Ru_Alfa_K123.jpg Views:	0 Size:	55.5 KB ID:	198661 Click image for larger version  Name:	images-27.jpg Views:	0 Size:	95.8 KB ID:	198660 Click image for larger version  Name:	Ru_Alfa_Side2200.jpg Views:	0 Size:	53.2 KB ID:	198659

    Last picture from the "Covert shores" website of Mr. Sutton. Always a good source for submarine insights!

    Jörg
    Last edited by JHapprich; 11-14-2026, 02:30 AM.

    Comment

    • BoatBuilderTexas
      Ensign
      • Nov 2026
      • 4

      #17
      The drybrushing really brings that little hull to life, Jörg. For a toy conversion the weathering reads far better than the size would suggest, and swapping to the stainless shaft with a bushing was a neat fix for the rattle.

      Comment

      Working...