1/72 November?

[598602G]

Here is a pic of the Su-7 I am building. Biggest molds I ever made. Fuselage is 73" long. Big big big jet. Got a turbine that is going into it. Puts out 21lbs of thrust @114,000 rpms. I have been building rc airplanes way before subs

[598602G]

Mad woman? I think I dated one of those. I am going like crazy on all 3 boats. Got them lined up. Also working on my 1/9 Su-7 Fitter. That is a Russian jet for you bubble heads. Soon as I get some glass clothe ordered I will be glassing November.

[HardRock]

I didn't post the pic of the cute little bugger November. That thing is so big if I blink twice it disappears. AK-47 is all I need for those rabid little hippity hop buggers.

Focus Dude. You're all over the place like a mad woman's breakfast. Get my 1/96 November finished!

[598602G]

Have a few winter scratch projects coming up. Have to make a 90+ mile one way drive to get some blue foam for the boat projects. So I dug out my old Foxtrot drawings. These are the only ones I have. Don't have any hull cross sections for it. Bought a real scale Foxtrot model with photo etched deck. I can enlarge the PE and use that to make the molds. Anyone have any Foxtrot drawings that show the hull cross sections? That one is going to be 1/72 so bring those pesky roo's on Scott

[598602G]

I didn't post the pic of the cute little bugger November. That thing is so big if I blink twice it disappears. AK-47 is all I need for those rabid little hippity hop buggers.

[HardRock]

Rabid kangaroos inbound. Best get your kevlar budgie smugglers on pronto. They always go for the crutch first (actual fact).

[598602G]

Isn't that just the cutest little boat. One day it will grow to 1/72 scale. Not. OK started back on the teeny tiny November. Got 2 other boats going as well. 1/72 Thresher and a 1/72 George Washington boomer. Got some foam out back just itchin to be made into a scratch Ivan boat. Did some chrome dome scratching and figured a Yankee I out to do the trick. I am thinking 1/72 scale for that but me thinks Scott may sick his rabies infected roo's on me.

[598602G]

Guys I have been so busy taking care of my 91 year old mom. That is a job in itself. Dave send me your address again if you can. I am going to send you all the 1/96 November stuff I have. You will have more time to finish them me. I am trying to finish up a huge scratch built Sukhoi Su-7 Fitter. Can't help it I am also a jet junky. I even got a killer deal on a real turbine engine for it. It is 4.25" in diameter and about 9" long. Thing puts out like 17+ pounds of thrust at about 114,000 rpm's. Once I get caught up on that 1/72 George Washington SSBN. Split mold so cheap ship down under. It is about the same length as the Delta. 1/72 Echo II after that. Any body interested in me doing a 1/72 Thresher? Don't want to step on anyone's toes on that one if y'all have that already covered

[bwi 971]

I see that the two shafts will put the intersection of their thrust lines behind the boats center of gravity. Damn!)

Probably a noob question....why damn?

grtz,
bart

[Tirfing]

During the meantime I publish a few pics that I have on the deck of the Ecco.

[Tirfing]

Hello Tim. Concerning Ecco II you should perhaps start up a new page where we could publish what we have. I have some too.

[He Who Shall Not Be Named]

The NOVEMBER kit I plan to work up is 1/96.

So, there!

David

[HardRock]

Bart you the man. Those are Echo II pics. Those are exactly that I need. Got some nice Russian Echo II drawings a Russian sent to me. They are good but where hard to make out the details on. The pics answer my questions. I know I am going to here the guys in here grumble but I just feel the need for a 1/72 Echo II. I will do a split mold so there will be a front and rear hull. Plus guys like hardrock/Terry won't have to pay $600.00 for shipping to down under.

Dude; don't make me come up there. If you do it in 1/96 there will be no need for a split mould. When will come out of the darkness? 1/96 - you know it's right.

[He Who Shall Not Be Named]

Bart you the man. Those are Echo II pics. Those are exactly that I need. Got some nice Russian Echo II drawings a Russian sent to me. They are good but where hard to make out the details on. The pics answer my questions. I know I am going to here the guys in here grumble but I just feel the need for a 1/72 Echo II. I will do a split mold so there will be a front and rear hull. Plus guys like hardrock/Terry won't have to pay $600.00 for shipping to down under.

Good to hear. And Bart, Gantu and the crew keep coming up with cherry stuff from which to work. Good stuff guys -- and your good sleuthing is most appreciated.

Well .... two of the HEN's are covered!

David

[598602G]

Bart you the man. Those are Echo II pics. Those are exactly that I need. Got some nice Russian Echo II drawings a Russian sent to me. They are good but where hard to make out the details on. The pics answer my questions. I know I am going to here the guys in here grumble but I just feel the need for a 1/72 Echo II. I will do a split mold so there will be a front and rear hull. Plus guys like hardrock/Terry won't have to pay $600.00 for shipping to down under.