David Merriman's Garage Sale

[subkraft]

Thanks...that will be great.
What price is on the small 11 inch long drivers?

The adjustment of the ballast tank is like this:

Wind the bulkhead in and out. I grabbed it thinking that it could be a good way of establishing the right size for a tank by trial and error.

[Kazzer]

Thanks...that will be great.
What price is on the small 11 inch long drivers?

$150 and they are assembled.

[greenman407]

Mike, I need a gas valve to fit my new SAS. Looking at my other cylinders, I would say that a gas valve from a 3" cylinder will work. What do you have there? Perhaps a gas bulkhead for a 3" cylinder? Or perhaps , if need be a full cylinder? At anyrate I want to rob a gas valve from it. Let me know. Thanks

[Kazzer]

Mike, I need a gas valve to fit my new SAS. Looking at my other cylinders, I would say that a gas valve from a 3" cylinder will work. What do you have there? Perhaps a gas bulkhead for a 3" cylinder? Or perhaps , if need be a full cylinder? At anyrate I want to rob a gas valve from it. Let me know. Thanks

One of these with all the levers and valve etc?

[greenman407]

Mike, Nice picture. All I need is the gas valve, that goes in the middle slot. However, if it all comes together, maybe I can use the other stuff in the future.

[He Who Shall Not Be Named]

[ATTACH=CONFIG]24201[/ATTACH]
One of these with all the levers and valve etc?

frightening!

M

[Kazzer]

frightening!

M

Get back to work. Slats needs his stuff!

[He Who Shall Not Be Named]

More torpedo development today, Boss. I'll gather his stuff up over the weekend. Kailagh just hit me with a PO.

M

[greenman407]

So what do you say there Mike? Got anything for me?

[subkraft]

$150 and they are assembled.

So $205 for both plus air post to Australia. If you can let me know the total I organise by paypal?

Thanks, Regards

[Kazzer]

SOLD

So $205 for both plus air post to Australia. If you can let me know the total I organise by paypal?

Thanks, Regards

This and the 11" Sub-driver?

[subkraft]

Yes please.
A couple of questions
-can you post a pic of the actual 11" subdriver so I know exactly what you're sending - or is it the one shown previously
- the 3.5 inch endcap....will need seals as well, yes?

Thanks..

[Kazzer]

SOLD





Here is the Sub-driver. It needs 3 servos.

[Kazzer]

SOLD

Here is a neat Ol' Sub-driver



4" long Ballast Tank
3" diameter
18" total length
2 x 400 motors gear reduced
4 servo seals
Gas saver system installed
Servo supplied for ballast tank operation - needs installing.
Equipment tray
Batteries housed inside the main dry space.

$150 a bargain!

[Kazzer]

I still have plenty of these!! $150 takes one!

• [ATTACH=CONFIG]24126[/ATTACH][ATTACH=CONFIG]24128[/ATTACH]
  
  Some of these units are complete with motors, servos, seals and gas system installed. The others I have the parts for. Now if only I could figure out what boats these could be used for.
  
  I also have plenty more parts to make the same sort of thing up for longer lengths of cylinder. It's a 2.5" cylinder.
  
  These are ideal for the Trumpeter 1:144 Seawolf and similar sized models.