Hi can some one help me out please . If i turn everything on and don't touch the controls it seems to sit idol with nothing happening it's when i power up the motor a little i will see the gliches more then ever.
I was also told there’s a adjustment on the CPU or something like this that controls when the fail safe kicks in and it may be dialed in to high of voltage level . When i put on the prop motor, the power is being drained below a voltage, level causing the Ballast pump, to glitch kicking in the fail safe, to go off and on.
when i turned on the sub and took the radio away from the sub from a distance there were no gliches, much better . But when i power up the prop motor i do get some small glitches, with the ballast pump it clicks .
.
Jim A
I was also told there’s a adjustment on the CPU or something like this that controls when the fail safe kicks in and it may be dialed in to high of voltage level . When i put on the prop motor, the power is being drained below a voltage, level causing the Ballast pump, to glitch kicking in the fail safe, to go off and on.
when i turned on the sub and took the radio away from the sub from a distance there were no gliches, much better . But when i power up the prop motor i do get some small glitches, with the ballast pump it clicks .
.
Jim A
Comment