Setup instructions

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mickelsen
    Lieutenant
    • Aug 2008
    • 94

    Setup instructions

    Where can I find a copy of the setup instructions for the microViper marine 10 that is used in the Seaview kit?

    Thanks.
    Hope is a harsh mistress!
    Mark
  • He Who Shall Not Be Named
    Moderator
    • Aug 2008
    • 12256

    #2
    Originally posted by mickelsen
    Where can I find a copy of the setup instructions for the microViper marine 10 that is used in the Seaview kit?

    Thanks.
    With the ESC hooked up to everything:

    1. Turn on the transmitter, center the throttle stick and trim lever.

    2. Turn on the SD system and very quickly, while the ESC red and green lights are blinking back and forth, press and hold the ESC programming button.

    3. Reach over to the transmitter and push the throttle stick all the way to the 'ahead' position, then pull it down to the 'astern' position, then return it to center.

    4. Release the ESC programming button.


    Done. Go forth and sin no more.
    Who is John Galt?

    Comment

    • mtroniks
      Lieutenant, Junior Grade
      • Apr 2009
      • 12

      #3
      Micro Viper Instructions.

      Hi!

      Have a click here, should be what you require;



      Best regards, Steve.

      Comment

      • He Who Shall Not Be Named
        Moderator
        • Aug 2008
        • 12256

        #4
        Originally posted by mtroniks
        Excellent, Steve. Thanks.

        I love your ESC's! I buy 'em 20 at a time. No fool'n, we provide them as standard in our 2-inch diameter SubDriver units. To date I've outfitted over 100 SubDriver's with the Mini ESC and have yet to encounter a bad ESC from your outfit -- now, that's quality!

        David,
        Who is John Galt?

        Comment

        Working...