Need help with TRACKER III Transmitter

[639mpa]

How do I get forward and reverse on the throttle joystick. Channel 3 (left side top to bottom movement) is not spring loaded to a neutral position. It has off to the bottom and full when moved to the top. I've only done planes before and am not sure how to set this up. I just toasted one ESC SUB10 and sure don't want to do another. See my other post.
Thanks, Bob

[KevinMc]

"Off @ bottom, full @ top" sounds more like an ESC setup thing than a Tracker setup thing. Why do you think it's a radio setup issue that caused your ESC to pack it in?

[He Who Shall Not Be Named]

Yeah, you have not yet set up your ESC. Leave the transmitter end-points alone.

Follow the ESC instructions for initial set-up.

David,

[639mpa]

That's what I was attempting when the ESC went toast. BTW the smell is aweful.
Thanks, Bob

[639mpa]

ESC

It was an ESC problem. I got a new one from the supply dept.(Caswell) while waiting on the toasted one. Put it in and set up per instructions and everything worked perfect. Thanks for the help.
Bob