8/25/2021 PM
David
I just purchased a 3.5” WTC. The WTC was purchased from Caswell and the previous owner never got it working. I figured out the correct receiver channel and powered it from a 2S battery, I don’t have a 3s battery right now but it requires a 3S battery, and everything worked. I cannot figure out what these black boxes are for in the WTC. The ESC servo connection red power line is taped over and not used.
WTC-1 & 2 – the part is powered from the battery and goes to a channel in the receiver. (Some sorta voltage regulator)
Labeling as best as I can tell
NL
50
^^ MC
7805CT
NLBU947
WTC-3, 4, &5 – the part is on the black lines on the ESC. (I have no idea)
Labeling as best as I can tell
JM990A??
LM29400
+5.0 P
Thanks
Ernie
WTC-1
WTC-2
WTC-3
WTC-4
WTC-5
David
I just purchased a 3.5” WTC. The WTC was purchased from Caswell and the previous owner never got it working. I figured out the correct receiver channel and powered it from a 2S battery, I don’t have a 3s battery right now but it requires a 3S battery, and everything worked. I cannot figure out what these black boxes are for in the WTC. The ESC servo connection red power line is taped over and not used.
WTC-1 & 2 – the part is powered from the battery and goes to a channel in the receiver. (Some sorta voltage regulator)
Labeling as best as I can tell
NL
50
^^ MC
7805CT
NLBU947
WTC-3, 4, &5 – the part is on the black lines on the ESC. (I have no idea)
Labeling as best as I can tell
JM990A??
LM29400
+5.0 P
Thanks
Ernie
WTC-1
WTC-2
WTC-3
WTC-4
WTC-5
Comment