A few years ago, I was given a vacuum/pressure gauge by Larry Kuntz, and today I rigged it to a little compressor I've been using to pressure a 10 gallon tank I use for spray painting with a little detail gun.
The idea was to put the tank on the input side of the compressor, to pull a vacuum on it. The vacuum gauge showed 20, which I presume meant -20psi.
My question is, will minus 20psi from a ten gallon tank be enough to pull better than a vacuum cleaner?
The idea was to put the tank on the input side of the compressor, to pull a vacuum on it. The vacuum gauge showed 20, which I presume meant -20psi.
My question is, will minus 20psi from a ten gallon tank be enough to pull better than a vacuum cleaner?
Comment