No surprises I ordered (deposit down) one of the RPM kits that are coming out early next year.
As this baby has three screws was wondering what God had in the works re a WTC.
Using my 1/72 Oberon as some experience - trying to use a 3" WTC proved difficult. There was too much bouyant real estate in the 3" down low in the sub -which is where you don't want it, but was unavoidably down low to simply fit the slender hull. The 2.5" worked a treat. The Oberon whilst different has very similar dimensions to the Foxtrot.
Was thinking simple way was to employ one geared motor to 3 shafts via wet gear box. DM over to you.
J
As this baby has three screws was wondering what God had in the works re a WTC.
Using my 1/72 Oberon as some experience - trying to use a 3" WTC proved difficult. There was too much bouyant real estate in the 3" down low in the sub -which is where you don't want it, but was unavoidably down low to simply fit the slender hull. The 2.5" worked a treat. The Oberon whilst different has very similar dimensions to the Foxtrot.
Was thinking simple way was to employ one geared motor to 3 shafts via wet gear box. DM over to you.
J
Comment