zoom resin casting lecture tomorrow

[He Who Shall Not Be Named]

[rwtdiver]

Hi David,

Really looking forward to the DiveTribe tomorrow, and especially your presentations....:-))

Rob
Firemen can stand the heat."

[Ken_NJ]

I noted few things from last week's presentation. Some of the products David mentioned I added links to below. You may have to hunt around for better prices. For the materials he shows in the above pictures, the manufacturers may have changed the packaging appearance.

David, if any of things is incorrect please let me know and I will make corrections

First I think Aluminite (company name) might have change the RC3 name from Aluminite RC3 to Alumires RC3.
https://www.alumilite.com/resins/alumires-rc-3-tan/ (Tan 32 oz)
https://www.alumilite.com/resins/alumires-rc-3-black/ (Black 32oz)
https://www.amazon.com/Alumilite-Alu...08R589CRX?th=1 (Black 32oz)

Mann Ease Release agent

https://tinyurl.com/442fj6dx

BJB silicon rubber for mold making

https://bjbmaterials.com/catalogsearch/result//?q=tc-5050

And maybe Polytek RTV rubber in place of the BJB brand?

https://polytek.com/silicone/platinum-cure-rubber

Baby power or corn starch

[He Who Shall Not Be Named]

Thanks, Ken. Good sleuthing and a real service to those looking to acquire some of these hard-to-get consumables. See you in a few hours.

David

[rwtdiver]

Looking forward to your part two presentation David,

Thank you,

Rob
"Firemen can stand the heat."