SUBES2 Switch-Question

[ADDINGTON]

When using this switch to control both vent solenoid and pump, do those devices have to use the Positive (+) output from the switch, or can I provide (+) to the devices directly from the main battery positive(+) and simply use the switchable ground (-) ES2outputs to complete the circuit and energize the device ?
Thanks,
Kerry

[Subculture]

If the subtech unit is happy to switch positive or negative loads, that will work fine.

[He Who Shall Not Be Named]

Just make sure you get the polarity right on the input side of the switch (batter-to-switch). The DC brushed motor and solenoid don't care about polarity (unless motor direction is an issue).

David,

[ADDINGTON]

Roger that-the pump motor direction is crucial so I will take polar care.
Thanks David.

[Rpmtech1]

That switch is a jalopy, it takes like 5 seconds for it to respond LOL.