This problem is on my other boat, "SSBN Harpoon-02" which has been running for awhile now. I have this posted also on U tube. It is a gas diving system sub.
This post is to solicit help for setting up ADF2. I had it working and in the course of a clean up and reassembly, the rear diving plane controlled by the ADF2 stopped responding correctly. It moves only in one direction from neutral. I have 3 ADF2's I am playing with, two are new. I cannot seem to program the servo to rotate both ways from neutral. Following the instructions for set up, it results in the servo rotating only in one direction. I tried another LIPO GUARD. same result. Changed the servo with one I know works. No change in result. Changed LIPO GUARD, no change in results.
I have done this programming many times that worked but this time it would not. I did not follow to the letter the factory instructions as I could not get it to work with it.
So I did it this way (I think). I suspect my issues are related to steps 2 and 3.
The vague part of the instruction is on step 2 and 3. This is where I have to do my own interpret. When you are at the 3 green blinking light. I would rotate channel 6 to surface action on the rear plane, tilt the ADF2 to surfacing direction, then push the set up button to green light. Release set up. 4 green blinks. Return CH 6 to neutral. Rotate CH 6 to dive, tilt ADF2 to dive also, push set up to green light. release set up. two red blinks for fail safe.
Now it will only respond with rotating in one direction, either way depending which rotation on Ch 6 you assigned to diving and surfacing.
Any one can give me a cookbook recipe to correctly program ADF2? Maybe I just lucked out in my method? Thanks.
This post is to solicit help for setting up ADF2. I had it working and in the course of a clean up and reassembly, the rear diving plane controlled by the ADF2 stopped responding correctly. It moves only in one direction from neutral. I have 3 ADF2's I am playing with, two are new. I cannot seem to program the servo to rotate both ways from neutral. Following the instructions for set up, it results in the servo rotating only in one direction. I tried another LIPO GUARD. same result. Changed the servo with one I know works. No change in result. Changed LIPO GUARD, no change in results.
I have done this programming many times that worked but this time it would not. I did not follow to the letter the factory instructions as I could not get it to work with it.
So I did it this way (I think). I suspect my issues are related to steps 2 and 3.
The vague part of the instruction is on step 2 and 3. This is where I have to do my own interpret. When you are at the 3 green blinking light. I would rotate channel 6 to surface action on the rear plane, tilt the ADF2 to surfacing direction, then push the set up button to green light. Release set up. 4 green blinks. Return CH 6 to neutral. Rotate CH 6 to dive, tilt ADF2 to dive also, push set up to green light. release set up. two red blinks for fail safe.
Now it will only respond with rotating in one direction, either way depending which rotation on Ch 6 you assigned to diving and surfacing.
Any one can give me a cookbook recipe to correctly program ADF2? Maybe I just lucked out in my method? Thanks.
Comment