Resin Casting and removable rod

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • trout
    Admiral
    • Jul 2011
    • 3547
    #1

    Resin Casting and removable rod

    I need help or suggestions. I am casting some dive planes and will need to have the final product with a shaft hole in it. The solution I have seen others do, is cast the piece with a brass rod in it. After the resin hardens, the rod is removed. So, what do I need to do to assure the rod will be released?
    (hopefully this makes sense, if not please ask me to clarify)
    If you can cut, drill, saw, hit things and swear a lot, you're well on the way to building a working model sub.
    Tags: None
    • Subculture
      Admiral
      • Feb 2009
      • 2121
      #2
      Just grease it.

        Comment

        • trout
          Admiral
          • Jul 2011
          • 3547
          #3
          That easy. I was way over thinking it.
          If you can cut, drill, saw, hit things and swear a lot, you're well on the way to building a working model sub.

            Comment

            Previous template Next
            Working...