I have several SN model kits I am going to clear out, as we simply do not have the time to develop the kit further.
My kit is really for the more advanced modeler, as there are going to be some more tricky things to work through.
So far, the kit will contain
1 x D&E Revell Skipjack Sub-driver + Extra section of Lexan
1 a 850 mah Vislero 7.2 battery
1 x Nano ESC
1 x Lepton 6 receiver
1 length 1/8" Prop Shaft
2 Prop shaft Seals
3 x Linear Servos
1 x Snort System
and -
3 x Gears McMaster Carr TBA
Propellers WW2/0675/3/LH/BR & WW2/0675/3/RH/BR
I have an idea to produce a simple gearbox to change the drive from one motor to operate two shafts. and to get these linear servos to operate through push-rod seals.
Let me know if you are interested in this project.
My kit is really for the more advanced modeler, as there are going to be some more tricky things to work through.
So far, the kit will contain
1 x D&E Revell Skipjack Sub-driver + Extra section of Lexan
1 a 850 mah Vislero 7.2 battery
1 x Nano ESC
1 x Lepton 6 receiver
1 length 1/8" Prop Shaft
2 Prop shaft Seals
3 x Linear Servos
1 x Snort System
and -
3 x Gears McMaster Carr TBA
Propellers WW2/0675/3/LH/BR & WW2/0675/3/RH/BR
I have an idea to produce a simple gearbox to change the drive from one motor to operate two shafts. and to get these linear servos to operate through push-rod seals.
Let me know if you are interested in this project.
Comment