New Subdriver with Snort fittings in the end caps

[He Who Shall Not Be Named]

Damn! that was easy!

[ATTACH]436[/ATTACH]

[ATTACH]437[/ATTACH]

[ATTACH]438[/ATTACH]

[ATTACH]439[/ATTACH]

[ATTACH]440[/ATTACH]

[Slats]

Mike and David,
very impressive - with your larger SD 2.5" and 3.5" kits can you please put these on your web page.

I have a feeling I'll be buying a 2.5" single screw and yet another 3.5" single soon with these new features.

best
John

[toppack]

I have a feeling I'll be buying a 2.5" single screw and yet another 3.5" single soon with these new features.John

I don't think the new snort design changes and installed power-switch are going to be on the older 2.5" and 3.5" SD designs.
Is that correct, David?
Or are they going to be an option, as add-ons to those, somehow?

[Slats]

I don't think the new snort design changes and installed power-switch are going to be on the older 2.5" and 3.5" SD designs.
Is that correct, David?
Or are they going to be an option, as add-ons to those, somehow?

Rick on older stock I would not think so, but I am hoping that they will feature on the newer stocked items.

As far as the 3.5" goes this has not come with a forward section, but in kit form perhaps it can, but if not I am not expecting and on/off switch on the 3.5".

From what I know the knew 2.5" single superceeds the 3" which had the forward battery section.

Mike and David I am sure will spell all this out in time as to what you get with each SD, but I do like the endcaps and other neat features I see here and do hope they are part of the new SD lineup in 2.5" and 3.5" single screw SDs.

John

[He Who Shall Not Be Named]

I don't think the new snort design changes and installed power-switch are going to be on the older 2.5" and 3.5" SD designs.
Is that correct, David?
Or are they going to be an option, as add-ons to those, somehow?

All but the tiny 1.25" SD's will be configured to accept the LPB sub-system -- I'm still working up the 1.25" SD design, but I can tell you now, there is little room for even the smallest of switches (that has a watertight boot) to fit.

Here's the bottom line: most of our SD's from now on will be configured for LPB and will have a forward bulkhead configured to accept a systems master switch.

David,

[junglelord]

Does this apply to the Seaview conversion?
When I make my subdriver purchase, can I order the new one, or must you sell the older design first>
Thanks

[He Who Shall Not Be Named]

Does this apply to the Seaview conversion?
When I make my subdriver purchase, can I order the new one, or must you sell the older design first>
Thanks

If you receive them without LPB hook-up fittings, let me know and I'll blast the parts off to you.

David,

[Slats]

If possible can we get some photos / dimensions and list of parts for the new single screw 2.5" WTC and 3.5" WTC kits?

Thanks

John

[SteveJ]

Dave

For those of us that have the Seaview SD already, will the LBP fittings be offered as an upgrade kit??

Stephen

[Kazzer]

Dave

For those of us that have the Seaview SD already, will the LBP fittings be offered as an upgrade kit??

Stephen

They already are ---

Look for the Small Snort Kit

[toppack]

Mike,
I think he's asking about the New system fittings that is part of new style end-caps and the 2 plastic parts that mount on top of SD, for attaching tubing and a feed-thru to hold it in place, and the tubing, not the small pump.

Click Pic:

I would still like to get some of that thin-wall plastic tubing myself?
I can only find some sold by the large roll, not by the foot.

[junglelord]

When one orders the Sub Driver for the Seaview, can I make sure that I get the unit in the photo above, vs the older style?

[Kazzer]

Junglelord


I'm pretty sure that all I have in stock are the newer ones. Someone (who shall be nameless but has on occasion had to wear pink underwear for his sins) just couldn't keep up!