Robbe Futaba F-14 Navy Alternative
Collapse
X
-
If you need a 35/40 MHz receiver, do a aliexpress such, still could find a synthesized one. -
Thank you! This one literally arrived on my doorstep this week, it looks like new old stock and I found the Navy throttle at a shop in the Netherlands!Leave a comment:
-
So some slight differences on the mods for the F-14. The trainer port on the F-14 is located in a slightly different location and is reversed from the FC-16 one depicted in my guide. My F-14 was converted to 2.4Ghz by the factory and they did not de-solder any jumpers , they just did not populate the crystal slot.
👍 1Leave a comment:
-
It's a euro spec F-14...was hoping to follow the guide that was posted in this thread
Leave a comment:
-
If you got an almost new F-14 I would go with that. As Futaba Robbe FC-28 most likely is more them you need. If its a US version 72mhz F-14, radio south can retune it. Reason I asked if its a US version is I asked Tony at Radio South to retune a Europe version F-14 that was on 35mhz to 75mhz and he said nope. I am hoping you found one of the super rare US version F-14 75mhz radios.Leave a comment:
-
I started posting a couple of more of my used 75mhz radio sub systems on Ebay. Just search "75mhz transmitter" First one went up last nite. they are Futaba, Robbe and some Vex systems. If you don't see any, then the latest listing sold and you need to wait till I add another listing.👍 1Leave a comment:
-
Not sure why you want an F-series, but any modern TX with OpenTX firmware leaves it standing in terms of features and functionality, and they cost peanuts.Leave a comment:
-
https://radiosouthrc.com/. This company can make anything you want I inquired as to whether they can convert a 72 MHz radio to 75 MHz... I was told no problem if I could supply the crystals..... Interesting possibilities...Leave a comment:
-
https://radiosouthrc.com/. This company can make anything you want I inquired as to whether they can convert a 72 MHz radio to 75 MHz... I was told no problem if I could supply the crystals..... Interesting possibilities...👍 1Leave a comment:
-
Leave a comment:
-
Ha! While I'm handy with a soldering iron, I have zero understanding of electronics - and don't even get me started on LEDs and resistor calculations!
I really appreciate the guide, thanks a million. Based on the board I see assuming this is an FC-16 you're modifying? Is the board similar across the F-14 and FC-* models? I'm sure there are differences, just wondered if they're significantly different, you know?
Cheers,Leave a comment:
Leave a comment: