New stuff

[greenman407]

I dont know who has seen what yet, but I just acquired some new bits from Dave and I wanted to show and tell. To those who are familiar with the 3.5" Subdriver, dual motor ,dual output, you will remember that the gearboxes were mounted on the outside. Well here is the new version of the motor bulkhead with some new features.
As you will note the gearboxes are internal which places the two shafts closer together, just what I needed, and they have dual orings. Also, the gearbox internals are accessed via the two screws which removes the plate that covers them. Those two screws will probably hold the equipment tray in place as well. Oh, and one last thing, everything is now green instead of Light Tan.

[greenman407]

I also got some 3" bulkheads as well, All new designs I believe. The 3" single motor ,single drive,is new to me in that the motor and gearbox are no longer housed inside a deep hollow bulkhead but are like all the rest. Also they no longer have flats on the side to attach your equipment trays. They also utilize the two screws on the face beneath the motor.If you will notice right here that they(two motor and one)have only one small oring.
Nice redesign. I am looking forward to putting them in service for my next DIABOLICAL undersea World Domination escapade.