Skipjack

[He Who Shall Not Be Named]

Hey now its Fast Attack tough.. Thanks for the offer but I will have to delay as I am going out of town for a few days. I had a duh moment and did not think of calibration even though I have use this brand of esc before. Once again you were right on the mark as your advice worked like a champ.

OF COURSE I WAS RIGHT!!!!!

What's wrong with you people?!!....

Safe trip, pal.

M

[SSN SonarTech]

Hey now its Fast Attack tough.. Thanks for the offer but I will have to delay as I am going out of town for a few days. I had a duh moment and did not think of calibration even though I have use this brand of esc before. Once again you were right on the mark as your advice worked like a champ.

[He Who Shall Not Be Named]

Thanks I will try that. And thanks David for all you r help Have a Merry Christmas and great New Year even though we are going to be having 70 degree weather

Drag that arking-sparking-spewing, steaming pile of ***** over here and I'll fix you up.

M

[SSN SonarTech]

Thanks I will try that. And thanks David for all you r help Have a Merry Christmas and great New Year even though we are going to be having 70 degree weather

[He Who Shall Not Be Named]

Everything hooked up, No smoke!!! everything works as advertised but I can not seem control the throttle. I set the endpoint to 50 as I have read about. Not very smooth response and no reverse. Is there something I am missing? Also need to make new control rods off the servos after bending they are to short. Moving on slowly Merry Christmas to all

Did you attempt to re-program the ESC? Go to the MTronik's site for info on that.

M

[SSN SonarTech]

Everything hooked up, No smoke!!! everything works as advertised but I can not seem control the throttle. I set the endpoint to 50 as I have read about. Not very smooth response and no reverse. Is there something I am missing? Also need to make new control rods off the servos after bending they are to short. Moving on slowly Merry Christmas to all

[SSN SonarTech]

Thanks for the info. what I was looking for.

[trout]

Try this:

https://support.caswellplating.com/index.php?/Knowledgebase/Article/View/371/49/setting-up-wfly-wft08-v4

[SSN SonarTech]

01-24-2012, 08:40 AM

Originally posted by vital.spark View Post
Hello Kevin,

Daved mentioned your guide is a god-send, where can I find it? At the moment I'm going one step forward and 2 steps backward.

Regards,

Myron



Scroll down the forum until you find LINKS TO TECHNICAL DOCUMENTS which will take you to KNOWLEDGEBASE
scroll down to find Setting Up The WFLY Radio WFT08 8 ch




Stop messing about - just get a Sub-driver!


Is this guide still available? The web page says it is unavailable? Seem to be just what I am looking for

[He Who Shall Not Be Named]

My transmitter and my lepto 6 are 72 Mhz. the instructions that came with the TX are for the 2.4 ghz model. I guess I was not clear enough. I am looking for a set up guide. The most channels I have used in the past are 2 channel systems and I want to make sure I have everything hooked up right and what controls what on the transmitter. Thanks for you help

Oh,

Set the transmitter for mode-2 and for 'airplane', not 'helicopter. Then just worry about servo reversing and end-points.

M

[SSN SonarTech]

My transmitter and my lepto 6 are 72 Mhz. the instructions that came with the TX are for the 2.4 ghz model. I guess I was not clear enough. I am looking for a set up guide. The most channels I have used in the past are 2 channel systems and I want to make sure I have everything hooked up right and what controls what on the transmitter. Thanks for you help

[He Who Shall Not Be Named]

it there a guide to setting up a WFLY WFT08X and a leptron RX . The instructions for the transmitter (that came with it) talk about 2.4 GHZ operation and I have 72 Mhz. I followed M's wiring diagram to hook everything up. I thought I had come across a TX setup guide but can not seem to find it.

That 2.4gHz transmitter is entirely unsuitable for operation with the 75mHz Lepton-8 receiver. Two different bands, and two different forms of modulation. You need to find a replacement 75mHz RF module for the transmitter (with antenna!), or find yourself another transmitter on the 75mHz band.

M

[SSN SonarTech]

it there a guide to setting up a WFLY WFT08X and a leptron RX . The instructions for the transmitter (that came with it) talk about 2.4 GHZ operation and I have 72 Mhz. I followed M's wiring diagram to hook everything up. I thought I had come across a TX setup guide but can not seem to find it.

[SSN SonarTech]

Well progress continues but slowed due to the holidays. For a Sonar Tech my soldering leaves a lot to be desired . But finally got everything hooked up. Hope nothing smokes when I hook it to a batt.

[SSN SonarTech]

Bubblehead. This forum will not let me answer visitor msgs so here you go: Just have fun and good luck. You will get lots of help here if you ask.. I thought A-gangers could fix/build anything? Good luck