. Bill Bibeault Bronco Type XXIII Build

[cgbillb]

just trying to load a photo seems it is my drop Box this one did not get to drop Box

[He Who Shall Not Be Named]

ok I see in VA
I spent 5 years in the Army running boats out of Fort. Eustis

Virginia Beach, VA, Bill. We used to have a great site to operate here -- Mount Trashmore lake -- but the city shut us down about fifteen-years ago shortly after a drunk, south-of-the-border illegal drowned there, and his illegal survivors sued the City for a ****-load of money.

Just another reason for the Wall! https://pilotonline.com/news/article...9e3de3afb.html

Today we use the JCC pool.

We do go to the Newport News City Park for the annual Fall Festival to show-off and operate the models -- and that's right next to Fort Useless.

David

[cgbillb]

ok I see in VA
I spent 5 years in the Army running boats out of Fort. Eustis

[cgbillb]

Where do you live David and yep for sure

[He Who Shall Not Be Named]

Yep that's my plan, work on the U-2326 doing the day type here when I get up in the am
And I am still learning this site. And I cant upload any photos today, let me go read the

RTFI for up loading
But I did get the rudder, and the propeller shaft stern-tube assembly installed and started printing my stand
Bill

one bit at a time, Bill.

David

[cgbillb]

Yep that's my plan, work on the U-2326 doing the day type here when I get up in the am
And I am still learning this site. And I cant upload any photos today, let me go read the

RTFI for up loading
But I did get the rudder, and the propeller shaft stern-tube assembly installed and started printing my stand
Bill

[He Who Shall Not Be Named]

I don't have time to sit here all night I am copying your 2013 build and making PDF, so I can make you a manual for your Type-23 fitting kit. HaHa
Thanks David I did need what channel goes where, my sailboats where differ, and I am 78 with agent orange no

screaming and kicking

allowed HaHa
Plus I am printing on my 3d printer a stand for the U-2326
Bill

I'm dealing with an old-fart. Good. You've been around the block a few times. Let's get this toy assembled and in the water, pal.

David

[cgbillb]

I don't have time to sit here all night I am copying your 2013 build and making PDF, so I can make you a manual for your Type-23 fitting kit. HaHa
Thanks David I did need what channel goes where, my sailboats where differ, and I am 78 with agent orange no

screaming and kicking

allowed HaHa
Plus I am printing on my 3d printer a stand for the U-2326
Bill

[He Who Shall Not Be Named]

Equipment (some of the major)
Radio, Vex: a 6 channel 75Mhz https://www.rc-submarine.com/

That's a fine system, Bill. Put the stern planes on channel-2, rudder on ch-1, the motor on ch-3, the ballast system on ch-5, and the bow planes on ch-6. Channels 5 and 6 are three-position only switches, but that's OK as the bow planes and ballast system work just fine as bang-bang items. Channel-4 is unused.

David

[He Who Shall Not Be Named]

Thanks but hope there is a lot of photos, people from Maine cant read
Bill

LOL. I'll drag you screaming and kicking through the process, Bill.

David

[cgbillb]

Thanks but hope there is a lot of photos, people from Maine cant read
Bill

[He Who Shall Not Be Named]

Dem of the U-2326 RC model
Length: 34.7 m (113 ft 10 in) = 39”

Beam: 3 m (9 ft 10 in) = 3.43”

Draft: 3.67 m (12 ft 0 in) = 4.11”

And a question, I got the type-23 fitting kit with my Bronco kit, but am not sure where all the parts go. I have Googled the kit number but no luck
Anyone have any ideal where I can get more documentation?
Thanks
Bill

Yeah... …

…... from me!

First, check this out: https://forum.sub-driver.com/forum/g...5th-scale/page

If, after careful review of this assembly-thread and you're still lost, hit me with you specific component location and attachment questions. I'll guide you along.

But first: RTFI

David

[cgbillb]

Dem of the U-2326 RC model
Length: 34.7 m (113 ft 10 in) = 39”

Beam: 3 m (9 ft 10 in) = 3.43”

Draft: 3.67 m (12 ft 0 in) = 4.11”

And a question, I got the type-23 fitting kit with my Bronco kit, but am not sure where all the parts go. I have Googled the kit number but no luck
Anyone have any ideal where I can get more documentation?
Thanks
Bill

[cgbillb]

Guess this does not like my drop box works great from a file in my laptop, will do it that way not a problem no more drop box.

[cgbillb]

Just to see how it will look from the kit Scale prop