. Bill Bibeault Bronco Type XXIII Build

[cgbillb]

What do you mean for as old guy you play good, ok I was asking because I I want to build my U-505 , after MY u-2326 IS IN THE WATER , WHERE YOU HANG OUT
Which will be here then. back to sanding don't have time to chat all day

[He Who Shall Not Be Named]

OH ok how about at SubCom you hang out there

I check out the board, but don't participate. We had a falling out with the leadership over there about a decade ago.

What was the last worthwhile WIP thread you saw over there? Entropy has caught up with that bunch.

I build. They talk. I teach. Most of them have not advanced past the techniques and gear I developed and applied to this hobby in the 90's.

You may have gathered by now, Bill -- I don't play well with the other children.

David

[cgbillb]

OH ok how about at SubCom you hang out there

[He Who Shall Not Be Named]

David
I just put the two hulls together a couple of times in fact and they go together great , have some more sanding and final touches to do, but works ok
So I am going to leave it for now, the taps being backwards that is and move on
I tried to get into your web site but does not load up, is it still active? Got the address from one of the post.
Bill

I don't have a web-site of my own. When I was D&E Miniatures I did, but that was a long time ago. This is where I hang out.

David

[cgbillb]

David
I just put the two hulls together a couple of times in fact and they go together great , have some more sanding and final touches to do, but works ok
So I am going to leave it for now, the taps being backwards that is and move on
I tried to get into your web site but does not load up, is it still active? Got the address from one of the post.
Bill

[cgbillb]

Yes David your right just like life, I broke one tab taking it off so I put that task aside for now, working on Conning Tower to I figure out how to fix my tap problem,
I may need to cut them all off and do something different Wine time HaHa

[He Who Shall Not Be Named]

yes I know after I saw a photo of yours trying to remove them as we write

Just a minor road-bump. Carry on, sir.

David

[cgbillb]

yes I know after I saw a photo of yours trying to remove them as we write

[He Who Shall Not Be Named]

You put the tabs in backward.

Moron!

David

[cgbillb]

Thanks Tom I will glue it in

[trout]

No issues Bill. Looks good!

[cgbillb]

Before I screw the frames up big time, and there is no information in the RTFI does this look right, if so great, Tom drill a 1/8 in hole for the alignment screw,
I did not have too it fell into the 1 inch hole exhaust hole
again is this right?
Thanks
Bill

[cgbillb]

Thank you Andy, I am not going to put a camera on the U-2326, but will add one to my U-505 so I saved that information, but now I have to go work on my U-2326 not allowed to chat.
Again thanks
Bill

[Subculture]

1.124" inside diameter, Andy.

David

Bit small. But I think this one will just about go- https://www.banggood.com/Mini-Smalle...r_warehouse=CN

[He Who Shall Not Be Named]

Tom and David thanks for all the help om my U-2326 build

Less groveling.

More assembly.

Damnit!


David