Search Result
Collapse
500 results in 0.0461 seconds.
Keywords
Members
Tags
-
Made all the 4mm stainless steel (SS) indexing pins (tapered), reinforced the hull with frames that also serve as supports for the WTC. Very happy with... -
Thks Tom, It has been too long, feels good to work on somthing for myself.
Grtz,
bart...Leave a comment:
-
PETG, glued in with epoxy, 4mm holes were included in the print and afterwards reamed for a snug fit.
Grtz,
Bart...Leave a comment:
-
It's been a while due to various reasons and other scale projects.
All parts were printed with better supports this time.
My...👍 1Leave a comment:
-
Hi Will,
I took a look online and found something that might be useful. The person will be capable of scaling the props to your desired dimensions....Leave a comment:
-
Just sharing.....
Jig for holding the blades in place when soldering
...Leave a comment:
-
To set the depth seems not so simple as the signal from the transmitter varies and is not stable. For the moment, I have run into a personal limitations...Leave a comment:
-
I was talking to a friend and former colleague of mine, and we discussed the open-source aspect of my project. One of the points we raised was the variability...Leave a comment:
-
I did....this is the one I considered JSN SR04T
https://www.google.com/search?q=JSN+...05&oq=JSN+SR04...Leave a comment:
-
The progress today, the PID in place and it controls the servo as the depth changes; the tube in the glass.
Requested depth was manualy set in the...Last edited by bwi 971; 10-24-2023, 04:02 PM.Leave a comment:
-
The depth control.
That was the biggest challenge so far. It did not want to cooperate; it ignored me for hours and hours. There are times when...Leave a comment:
-
My preference was to create a PCB where all components would be integrated. While software aids were available, the challenge remained. I aimed for the...Leave a comment:
-
While adding components to the Arduino Nano, I carefully monitored the available pins. It's important to note that not all pins are equally suitable for...Leave a comment:
-
I adjusted my BOD cfr feetback of Readboat and David meaning I changed the pitch controll to the aft planes and depth control to the fwd planes, also...Leave a comment:
-
Leave a comment: