Captain Nemo's Rifle- and now for something completely different...

[Groot689]

Thanks Coryhenry, I believe that it is 30 inches long.

[Groot689]

The finished rifle prior to mounting on the wall of my office. While there were a number of missed opportunities to fill in more imperfections and smooth...

[Groot689]

Finally the trigger guard, trigger, sights and pneumatic hose were painted and then added to the cylinder. Once each component had been secured using...

[Groot689]

The pneumatic cylinder was next. Test fitting the aluminum barrel quickly uncovered the need to enlarge the mounting brackets. I mounted a 1/2 threaded...

[Groot689]

I focused my attention on the rifle stock as well as the main cylinder by replacing many of the resin screws with real ones. The muzzle brake was next...

[Groot689]

Let me preface this post by readily admitting that this topic might not exactly fall under the "r/c submarine" project genre but I thought I...

[Groot689]

Thanks everyone for your responses. I have several projects that are nearing completion that will need some form of plaque. Bob, your offer for a 3D...

[Groot689]

I posted this question on another forum and did not get much of a response so I thought I would give you guys a try. Can anyone direct me to a vendor/craftsman...