Don’t like self centering on the throttle, so I removed the spring and I put a small plastic piece of a wire tie in the swing mechanism. Works well.
VEX Throttle Centering Mod
Collapse
X
-
I don't know vex but basically they are futaba from what I understand.. there is usually a ratchet surface on the gimbal and a small flat spring rides on that ratchet (to provide holding tension) with two small screws holding that leaf spring. sometimes its there and is backed off and sometimes its just not there..if the ratchet and holes are there-its a very easy thing to make a flat spring. check the other stick functions sometimes its used elsewhere . Regardless I suggest you put all unused parts, after this mod in a micro zip bag and leave in the trx case so you can find it in the future.Last edited by Bob Gato; 05-27-2021, 11:33 AM.Comment
-
Last edited by Das Boot; 05-27-2021, 10:44 PM.“Of the 40,000 men who served on German submarines, 30,000 never returned.”Comment
-
👍 1Comment
-
Comment
-
Glad I could help-
there's a saying ... "the shoemakers children go barefoot" LOL this is my transmitter for my Mark V. The left stick is throttles and steering, the right stick is the jet buckets. Its working so well that I never opened the case to see what I have to work with! I just keep changing the rubberbands!
👍 1Comment
-
Can't think of anything thing that could change faster then the rubber band.
Also saw someone uses rubber bands to setup as dual rate.
find this some years ago, now you could program the TX with a phone. Over bluetooth.
Digital Radio for Android - The Powerful Tool for USB Transmitter 6 Channel 2.4GHz for HobbyKing, FlySky, Turborix, Exceed and Storm models, for Android mobile phones
Too bad , my gave up the blue smoke.Comment
Comment