This is going to be a new 3D printed submarine build using one of the two 3D STL files that I purchased from Nautilus Drydocks. The 2.5" Sub-Driver is coming and was sent to me from David Merriman. (Thank you David) My intent is to build the SIZE of the chosen Sub by possibly decreasing the size of the 3D STL files so that it will be a perfect match for the SD. To be determined after seeing the SD.
A new adventure about to begin! I will really need some help with setting up the SD. The electronics (servos, ESC, receiver, battery and linkages) will not be a problem, but the ballast system will be another learning process for me. I do believe the SD will be arriving today, and if so I will put up some photos of it.
Thanks....
Rob
"There are no mistakes-just happy accidents"
A new adventure about to begin! I will really need some help with setting up the SD. The electronics (servos, ESC, receiver, battery and linkages) will not be a problem, but the ballast system will be another learning process for me. I do believe the SD will be arriving today, and if so I will put up some photos of it.
Thanks....
Rob
"There are no mistakes-just happy accidents"
Comment