We never stop learning. We can never know everything. If that ever happened it would all be pointless. It's this that keeps us going and growing hopefully for a long time to come. Thanks David.
-
Go get 'em, Tiger!
Thank you very much David! I will get the 3M Blue masking tape for sure, and some good sharp #11 blades.
Now get ready for this!
I am ready to take the leap and start learning to do air brushing, and some (believe it or not) honest to god weathering on my boats!! :-)) So I will REALLY be STUDYING your methods you have posted up and most likely have some questions along the way!
Thank again David,
Rob
"Firemen can stand the heat."Leave a comment:
-
Thank you very much David! I will get the 3M Blue masking tape for sure, and some good sharp #11 blades.
Pest? Hell no! You actually get things done -- I love that! As opposed to those who just ask questions to keep their gums in motion. When I'm done raking guys like you over the coals, Rob, I feel like I've actually helped move the Craft along. You're not a pest. No. You're a willing student ready to actually apply what you learn -- makes all the picture taking worthwhile.
(Now, I take a moment to yank my nose out of your ass).
I like the 3M Blue 'painters masking tape'. Cheap and a lower tack than that nuclear powered tan tape!
The vinyl striping tape will take a sharper radius than the 3M blue but is expensive and hard to source locally. Cut the blue in narrow enough strips and you can lay down a radius as tight as you want.
For very tight, exacting curves, pre-form your masking tape by cutting out the shape with the aid of a swivel-knife (a #11 will work if you practice enough) following a plastic sheet stencil. Note the use of brass tube cutting punches to give form to small circular masks.
Now get ready for this!
I am ready to take the leap and start learning to do air brushing, and some (believe it or not) honest to god weathering on my boats!! :-)) So I will REALLY be STUDYING your methods you have posted up and most likely have some questions along the way!
Thank again David,
Rob
"Firemen can stand the heat."Leave a comment:
-
Pest? Hell no! You actually get things done -- I love that! As opposed to those who just ask questions to keep their gums in motion. When I'm done raking guys like you over the coals, Rob, I feel like I've actually helped move the Craft along. You're not a pest. No. You're a willing student ready to actually apply what you learn -- makes all the picture taking worthwhile.
(Now, I take a moment to yank my nose out of your ass).
I like the 3M Blue 'painters masking tape'. Cheap and a lower tack than that nuclear powered tan tape!
The vinyl striping tape will take a sharper radius than the 3M blue but is expensive and hard to source locally. Cut the blue in narrow enough strips and you can lay down a radius as tight as you want.
For very tight, exacting curves, pre-form your masking tape by cutting out the shape with the aid of a swivel-knife (a #11 will work if you practice enough) following a plastic sheet stencil. Note the use of brass tube cutting punches to give form to small circular masks.
Leave a comment:
-
Hi David,
It's the pest again with a question about finishing work.
What brand masking tape do you prefer? I learned from you to cut a new edge on the tape rather than use it as it comes off the roll. Also I seen you (in other photos) make your own pin stripping tape for going around curves, so it seems you may just purchase one or two width sizes of tape that will accomplish all your masking needs! (I am about ready to try my hand at "Air Brushing" I have the equipment so it's time to get my feet wet.
Thanks David,
Rob
"Firemen can stand the heat."
Leave a comment:
-
-
-
Leave a comment:
-
-
-
Von Braun and Geroge Pal shared two tenents they adhered too when presenting a technological challenge: That the science of the machine or concept was well understood; and achievement of the goal could be done without any significant advancements in the 'state of the art' as it stood at the time of invention.
Von Braun's giant Cargo Rocket, space station, moon ships, and Mars ships were all possible within the state of the art as it stood in the late 40's.
Pal's LUNA, the Ark of space, and his ships of, The Conquest Of Space were all movies that presented hardware that was within the capabilities of any company, country or nations willing to fund and build them.
Ellie and I had the opportunity to build models of some of those concepts. Some of our happiest times!
Last edited by He Who Shall Not Be Named; 02-05-2023, 10:11 PM.Leave a comment:
-
David & Steve,
For sure, one of my most favorite Sci-Fi movies of all times. "When Worlds Collide" That art work you did "After Worlds Collide" is fantastic David! What a vision you had. Someone needs to do the original movie again and add your vision as to how it all could have ended. Wonderful work David! You are and have always been a visionary for sure!!
Rob
"Firemen can stand the heat."
Leave a comment:
-
I love seeing this. And thank you for taking the time. I especially love the drawing of the ark after the landing. Genius.
OK, Steve. Sorry for the delay. Here's the story:
From age ten I knew I was going to build models professionally for the movies; just about every free moment of my life -- through school and a career in the Navy -- was spent studying and practicing the Craft.
One vital aspect of the discipline is learning how to draw, both technical and sketch type work; stuff you can work from and stuff to tickle the creative juices of you and the client alike.
One such exercise was to draft a very famous SF movie spacecraft, 'The Ark of Space', and make the presentation in an ersatz 'general arrangement', three-view, orthographic format. Complete title-block, technical authentication blocks and listing of associated drawing numbers. Very official looking. That project done during off-hours aboard the USS YOSEMITE on a Mediterranean half-year deployment -- something to add to my ever-expanding resume; my door-opener for the day Ellie and I would march into Burbank and demand a high-paying model-builder's job.
Later, I added axillary views to illustrate suggested model building techniques -- all that condensed into an article for one of the many model magazines I was contributing to at the time.
Professionals either publish, or they perish! Mom taught me that. And she was right.
Much to my surprise, that drawing recently found its way into the pages of Bill Warren's magnum opus of SF movies, KEEP WATCHING THE SKIES. I don't know if he's aware that the drawing is merely a work of fan-art and not from the Parmount files. Well... cat's out of the bag now!
And in time we did get some movie and TV work -- and that portfolio, featuring sketch, conceptual, orthographic, and story-board work got us the jobs. A life well planned.
Leave a comment:
Leave a comment: